Zebralight SC51F 200 Lumen Flood AA LED Flashlight

ZebraLightSKU: zebralightsc51F

Price:
Sale price$69.99
Stock:
Sold out

Description

Please note that this is the flood version of the SC51 and the specs below are for the regular SC51. The SC51F has a frosted lens, which does a great job of smoothing out the beam and making a very nice flood light, but it greatly reduces throw.

Main Features and Specifications


  • LED: Cree XP-G Cool White (color temperature 6100-6500 K)
  • User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.
  • Light Output
    • High:         H1 200 Lm (0.9 hrs)   or    H2  140 Lm (1.7 hrs) / 100 Lm (2.4 hrs) / 4Hz Strobe
    • Medium:    M1  30 Lm (12 hrs)    or    M2      8 Lm (39 hrs)
    • Low:         L1   2.5 Lm (3 days)   or    L2   0.2 Lm (16 days)
    • Light output are out the front (OTF) values. Runtime tests are done using Sanyo 2000mAh Eneloop AA batteries.
    • 200, 140, 30, 8 and 2.5 Lumen output are current regulated. 100 and 0.2 Lumen output are PWM generated.
  • Voltages: 0.7V - 2.5V
  • Battery: One 1.5V AA (NiMH, lithium or alkaline). 14500 Li-ion batteries are not supported. Batteries are not included in the package.
  • Parasitic Drain: Negligible (equivalent to 16 years)
  • Beam Type
    • 80° spill beam spread
    • 11° (3.8 feet at 20 feet) hot spot
  • Dimensions
    • Diameter: 0.85 inch (22 mm)
    • Length:    3.15 inch (80 mm)
  • Weight
    • 1.3 oz (36.5 gram) with clip, without battery or headband 
  • Features
    • Electronic soft-touch switch, with a 200,000 cycle operating life
    • Smart user interface provides fast and easy access to all brightness levels
    • Precision machined unibody casing from premium grade Alcoa aluminum bar stock
    • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing, providing unblocked thermal paths to over 94% of the surface area.
    • Durable natural hard anodized finish (Type III Class I)
    • SCHOTT ultra clear lens with anti-reflection coatings on both sides
    • Bezel down clip (pre-installed)
    • Can be used as a headlamp with the included headband
    • Orange peel textured reflector
    • Anti-roll and tail-standing capable
    • Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
    • Waterproof to IPX8 (1 meter 30 minutes)

Operations


This light has 3 main levels (High, Medium, and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.

  • Basic Operation
    • Short click turns on the light to High or turns off the light.
    • Long click (press and hold for about 0.6 seconds) turns on the light to Low.
  • Advanced Operation and Configuration 
    • Short click turns on the light to High. Short click again quickly to cycle from High to Medium, and Low.
    • Press and hold to cycle from Low to High, release to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
    • Double click to toggle and select between the two sub-levels for that main level. Sub-level selections (except the strobe) for the 3 main levels are memorized after the light is turned off and through battery changes.
    • The second sub-level of the High can be configured after 6 double clicks. Double click (startng with the 7th) to cycle and select different brightness levels or strobes. Short click to turn off the light when finishing configurations. The selections for the second sub-level of the High are memorized after the light is turned off and through battery changes.

 

Accessories in the package


  • One black silicone holder with headband
  • Two o-rings

You may also like

Recently viewed