The ZebraLight H60w is a high performance all aluminum headlamp with a warm white tint LED. Powered with one 18650 battery, the H60w can produce a maximum of 157 Lumen out the front (Torch Lumen) with a smooth flood beam and and can run continuously for 26 days on its lowest output level. The H60w can be used as a headlamp as well as a task light with supplied accessories.

Main Features and Specifications

---

• LED: Cree XLamp XR-E Q3 5A
• 3 modes, each can be set to one of the two levels for that mode
  • High: 157 lm (2 hrs) or 91 lm (4 hrs)
  • Med: 37 lm (10 hrs) or 12 lm (50 hrs)
  • Low: 0.4 lm (26 days) or 2.4 lm (9 days)
  Low and Med settings are memorized. Factory default settings are 110, 15 and 3 lm. All output are out the front (Torch Lumen) figures. Tested with Panasonic 2550 mAh 18650 batteries.
• Battery
  • One 18650 size rechargeable within the 2.8v to 4.5v range, including 3.6v/3.7v Li-ion or 3.0v LiFeP04 chemistries.
  • Reverse polarity protection circuit. Works with batteries that have flat positive terminals.
  • Discharging protection circuit turns off the light when the battery voltage drops below 2.8v.
• Out of the six levels, four (190, 110, 15, and 3 lm) are current regulated and two (45 and 0.5 lm) are PWM derived.
• Electrically conductive aluminum body provides inherent EMI/RFI shielding characteristics
• Standby power consumption when the light is off: <1 μA
• Weight
  • 33 gram (1.2 oz)
  • 77 gram (2.7 oz) with battery
  • 100 gram (3.5 oz) with battery and headband
• Dimensions
  • Length 91mm (3.6 inch)
  • Diameter (body) 21.5 mm (0.85 inch)
  • Diameter (head and tail) 23.5 mm (0.92 inch)
• 80 degree flood beam, with no hotspot.

Construction

---

• CNC machined casing from Alcoa premium grade aluminum alloy billet, light weight with superior structural strength
• Durable natural hard anodized finish
• Impact resistant LEXAN polycarbonate lens

Operations

---

• From Off
  • Press and hold to cycle through Low, Med and High, release to set.
  • Click to High, click again quickly to cycle through Med, Low and High.
• When On
  • Click to Off.
  • Press and hold to cycle through Low, Med and High, release to set.
  • Double click to toggle between the two levels for that mode.

Note: Low and Medium settings are memorized after the light is turned off. High setting stays at the 110 lm (i.e. not memorized) after the light is turned off. High setting to the 190 lm has a 10 minute timer that automatically switch the light back to the 110 lm to prevent the light from overheating.

Waterproof

---

Meets IP68 in accordance with IEC 60529

• Dust-tight
• Protected against continuous immersion (1meter, >30 minutes)

Accessories in the package

---

• One black silicone holder with headband
• Pocket clip, can be put on or removed without any tools
• Two O-rings
• One glow in the dark silicone switch cap
• One glow in the dark silicone holder