XTAR H1 Commander AA Headlamp 330 Lumen 1 x AA


Sale price$53.00
Sold out


XTAR Dual light sources AA/14500 headlamp - Commander AA H1

  • ANSI Illumination levels:   Turbo     High       Mid     Low   Red On   SOS     
  • AA Batteries:                        /        120Lm     60Lm     3Lm   3Lm     3Lm
  • 14500 Lithium Batteries:  330Lm  120Lm   60Lm     3Lm   3Lm     3Lm
  • AA Batteries:                        /           2.1h         4h           95h     /           /
  • 14500 Lithium Batteries:      80min  1.5h     6.0h      180h      /           /
  • Max Range :   AA Batteries:            65m / 14500 lithium Batteries:   106m
  • Max Intensity:  AA Batteries:           1060cd / 14500 lithium Batteries:  2820cd
  • Impact Resistance:  1.5m
  • Waterproof:   IPX8
  • LED: CREE XP-G2 R5 LED (main light) CREE Φ5.00mm High output Red light
  • Crust Materials: Anodized aircraft 6N01 aluminum alloy, type III hard-anodized anti-abrasive finish
  • Working Voltage: 0.9~4.2V
  • Battery: 1*AA/14500
  • Switch: Side clicky switch
  • Size: Φ23.0mm(Head dia)x Φ21.5mm(Body dia)xΦ21.5mm(Tail dia)x97mm(length)
  • Net Weight : 53g(Excluded batteries)
  • Additional Functions: Battery type recognition, Automatic shift down, over-discharge protection


  • Battery type recognition, different battery provides different output
  • Automatically shift down: When use lithium batteries, H1 could switch to high from turbo automatically. and voltage is below 3.0, it switch to Low mode, and voltage is below 2.75V, H1 turn off automatically.
  • Dual light sources, main light is for lighting and secondary light is for Signal use.
  • Click the switch to change between lighting modes, Double click the switch to access and change between the signal modes. In either signal mode, pressing the switch once changes to Low mode.
  • Reverse-polarity protection to prevent damage from incorrect battery insertion


  • Because of the different characteristics of different battery types, the light output and runtime can vary.
  •  Fully charged 14500 lithium battery with protection circuit is recommended. 
  • Only when using fully charged 14500 lithium batteries, the H1 provides Turbo mode and battery over-discharge protection.
  • When using incompletely charged 14500 lithium batteries, the H1 will operate as if an AA battery is being used.
  • When using a LiFePO4 battery, the system will protect the battery in advice, thus the battery will not over discharge.
  • When the H1 is not to be used for a prolonged period, it is recommended to remove the battery.

You may also like

Recently viewed