Weltool W3 Pro TAC LEP Flashlight – 930 Lumens, 547,500 Candela, 1,479m Beam Distance, USB-C Rechargeable

he Weltool W3 Pro TAC LEP Flashlight is a high-performance tactical lighting tool designed for professionals and enthusiasts who require exceptional long-distance illumination. Utilizing advanced Laser Excited Phosphor (LEP) technology, this flashlight delivers a concentrated beam with minimal spill, making it ideal for search and rescue operations, law enforcement, maritime signaling, and long-range observation.

Key Features:

• Unmatched Beam Distance: Achieve a beam throw of up to 1,479 meters (approximately 1.5 kilometers), powered by a 547,500 candela intensity.

• High Lumen Output: Emits 930 lumens on high mode, ensuring bright and clear visibility over extended distances.

• Dual-Mode Operation: Features high and low modes, plus a hidden strobe function activated by a triple half-press when off.

• Rugged Construction: Crafted from durable aluminum with a black hard anodized finish, equipped with an acrylic convex lens and stainless steel bezel.

• Rechargeable Power: Includes a Weltool UB21-50 21700 5000mAh rechargeable Li-ion battery with USB-C charging capability.

• Waterproof & Impact-Resistant: IP67 rated for water resistance and has passed a 1-meter drop test.

• Compact & Tactical Design: Measures 162mm in length with a head diameter of 33mm, weighing approximately 168g without the battery.

Included in the Box:

• Weltool W3 Pro TAC LEP Flashlight

• Weltool UB21-50 21700 5000mAh Rechargeable Li-ion Battery

• USB-C Charging Cable

• Stainless Steel Pocket Clip

• O-Ring

Please note: The W3 Pro TAC is classified as a Class 1 laser device. Avoid direct eye exposure and use in accordance with applicable laws and regulations.

Output：

 

(Tested with Weltool UB21-50 5000mAh 21700 rechargeable lithium-ion battery, outdoor, constant on, below 25 degrees Celsius)

This LEP light source complies with IEC 60825 Class 1 and IEC 62471 Exempt

Use one 21700 li-ion rechargeable battery

Tail Forward switch, 50,000 press life

High efficiency drive circuit, no noise and no PWM

when the flashlight temperature is too high, the flashlight will automatically reduce the brightness to prevent overheating

With reverse polarity protection

With low voltage prompt function,With battery over discharge protection

Coated tempered glass lens 

Passed 1 meter drop test

IP67，can be used in heavy rain

Each flashlight has a unique serial number

Size (±0.5mm): (head diameter) 33mm, (body diameter) 26.5mm, (length) 162mm

Weight: 168±0.5g (without battery)

Included: UB21-50 li-ion battery, Type-C charging data cable, waterproof ring, stainless steel pocket clip

 

Instructions:

• First install the battery correctly

• Half-press the tail switch button once to turn on the high mode, release it to turn off, even if this operation is frequent, it will be high. At this time, press the switch hard to make a "click" sound to keep working continuously, and press the "click" again to turn off the flashlight.

• The hidden mode can be activated by half-pressing more than 4 consecutive times in the off state. When the hidden mode is turned on, the strobe is first. At this time, release the switch and then half-press it to switch to low immediately. Low and strobe can be switched in a cycle. Press the switch firmly to lock the strobe or low continuous operation; in the hidden mode, it will automatically exit the hidden mode and return to the high mode after shutting down for more than 1.5 seconds.

• When the battery power is low, the main light of the flashlight will flash to remind you, please charge the battery in time.

• When the battery power is exhausted, the flashlight will automatically stop working.

Use suggestions:

• Do not disassemble the parts by yourself, this will void the warranty and may damage the flashlight.

• It is normal for the flashlight to heat up when it is working; however, it is only recommended to use it in an environment where the outdoor ventilation (wind speed exceeds 5m/s) and the temperature is below 25 degrees Celsius! Continuous high light for a long time will accumulate heat. Turn off the flashlight in time when the hand feels a lot of heat; turn it on again after the flashlight cools down.

• After long-term use, please replace the O-ring in time to maintain waterproof performance.

• After long-term use, Please use professional grease to lubricate the thread in time.

• Please clean the conductive contact surface of the flashlight in time to ensure the normal operation of the flashlight

• We recommend that you remove the batteries and recharge the batteries at least every 3-4 months when you will not use the flashlight for an extended period of time.

• This flashlight has excellent waterproof effect, but it cannot be used as a professional diving flashlight.

• Do not aim the beam at the eyes and skin to avoid vision damage or skin burns, and keep away from children.

• Do not aim the beam at other people, nor at mirrors, glass or objects that may reflect light on the surface. The reflection may cause the same damage as direct light; it is strictly forbidden to aim at moving airplanes and cars!