Description
The Weltool W3Pro FDE TAC LEP Tactical Flashlight brings extreme long-range performance to a rugged new Flat Dark Earth finish. This TAC version of the W3Pro is built for users who need maximum throw, instant high-output activation, and a focused LEP beam for search, rescue, field signaling, inspection, and tactical lighting applications.
Powered by one 21700 rechargeable lithium-ion battery, the W3Pro TAC produces up to 930 lumens with an impressive 547,500 candela and a beam distance of up to 1,479 meters. Its LEP light source delivers a tight, high-intensity beam with usable close-range spill, making it especially effective for long-distance identification, sea indication, high-voltage tower maintenance, and other specialized lighting tasks.
The tactical interface is designed around fast access to high mode. The flashlight defaults to high when activated, while strobe and low modes are hidden to reduce accidental mode changes. A forward tail switch allows momentary-on operation with a half press or constant-on operation with a full click. Hidden strobe and low modes can be accessed with rapid half presses from the off position.
Built from aluminum alloy with a hard anodized Flat Dark Earth finish, the W3Pro FDE TAC includes a coated tempered glass lens, reverse polarity protection, low-voltage warning, over-discharge protection, and automatic thermal stepdown to help prevent overheating. It is IP67 rated for heavy rain, 1-meter drop tested, and individually serialized.
Feature Highlights
-
New Flat Dark Earth colorway for a rugged tactical look
-
LEP tactical flashlight with extreme long-range throw
-
930-lumen maximum output
-
547,500 candela peak beam intensity
-
Up to 1,479 meters / 1,617 yards of beam distance
-
TAC interface defaults to high mode on activation
-
Hidden strobe and low modes help prevent accidental mode changes
-
Forward tail switch supports momentary-on and constant-on use
-
Powered by one 21700 rechargeable lithium-ion battery
-
Includes Weltool UB21-50 5000mAh 21700 rechargeable battery
-
Special LEP module with 5700K–6700K color temperature
-
No PWM and no driver noise
-
Automatic brightness reduction helps prevent overheating
-
Reverse polarity protection, low-voltage prompt, and over-discharge protection
-
Coated tempered glass lens
-
IP67 rated for use in heavy rain
-
1-meter drop tested
-
Each flashlight has a unique serial number
Output
Tested with Weltool UB21-50 5000mAh 21700 rechargeable lithium-ion battery, outdoors, constant-on, below 25°C.
| Mode | Output | Peak Intensity | Beam Distance | Notes |
|---|---|---|---|---|
| High | 930 lumens | 547,500 candela | 1,479 m / 1,617 yd | Default mode on activation |
| Low | Not specified | Not specified | Not specified | Hidden mode |
| Strobe | Not specified | Not specified | Not specified | Hidden mode |
Specifications
| Specification | Detail |
|---|---|
| Brand | Weltool |
| Model | W3Pro FDE TAC |
| Flashlight Type | LEP Tactical Flashlight |
| Color | FDE / Flat Dark Earth |
| Maximum Output | 930 lumens |
| Peak Intensity | 547,500 candela |
| Beam Distance | 1,479 m / 1,617 yd |
| Light Source | Special LEP module |
| Color Temperature | 5700K–6700K |
| LEP Module Lifespan | About 10,000 hours |
| Battery | 1 x 21700 rechargeable lithium-ion battery |
| Included Battery | Weltool UB21-50 5000mAh 21700 rechargeable battery |
| Switch | Tail forward switch |
| Switch Life | 50,000 presses |
| Driver | High-efficiency drive circuit |
| PWM | No PWM |
| Lens | Coated tempered glass lens |
| Body Material | Aluminum alloy |
| Finish | Hard anodized Flat Dark Earth |
| Head Diameter | 33 mm ±0.5 mm |
| Body Diameter | 26.5 mm ±0.5 mm |
| Length | 162 mm ±0.5 mm |
| Weight | 168 g ±0.5 g without battery |
| Water Resistance | IP67 |
| Impact Resistance | 1 meter drop tested |
| Safety Compliance | IEC 60825 Class 1 / IEC 62471 Exempt |
| Serial Number | Unique serial number on each flashlight |
| Included Accessories | UB21-50 battery, USB-C charging cable, waterproof ring, stainless steel pocket clip |
Operation Instructions
Install the battery correctly before use.
Half-press the tail switch once for momentary high mode. Release the switch to turn the light off. Fully press the switch until it clicks to lock high mode on, then click again to turn it off.
To access the hidden modes, rapidly half-press the switch more than 4 times from the off position. Strobe activates first. Release and half-press again to switch to low. Low and strobe cycle with additional half presses. Fully press the switch to lock the selected hidden mode for continuous operation. After the flashlight is turned off for more than 1.5 seconds, it exits hidden mode and returns to high mode.
When the battery is low, the main light will flash as a reminder to recharge the battery. When the battery is exhausted, the flashlight will automatically stop working.
Use and Safety Notes
Do not disassemble the flashlight, as this can void the warranty and may damage the light.
It is normal for the flashlight to become warm during operation. For extended high-output use, Weltool recommends outdoor ventilation with wind speed above 5 m/s and temperatures below 25°C. Turn the flashlight off if it becomes too hot to hold comfortably, and allow it to cool before turning it back on.
Replace the O-ring after long-term use to help maintain waterproof performance. Lubricate threads with professional-grade grease as needed and keep conductive contact surfaces clean.
For long-term storage, remove the battery and recharge it at least every 3–4 months. The flashlight has strong waterproof performance, but it is not designed for professional diving use.
Do not aim the beam at eyes or skin, and keep away from children. Do not aim the beam at people, reflective surfaces, aircraft, or moving vehicles.
FAQ
What color is the Weltool W3Pro FDE TAC?
This version comes in FDE, or Flat Dark Earth. It is a new colorway for the W3Pro TAC and gives the flashlight a rugged tactical appearance.
How far can the Weltool W3Pro TAC throw?
The W3Pro TAC can reach up to 1,479 meters, or approximately 1,617 yards, with a peak intensity of 547,500 candela.
Is the Weltool W3Pro TAC an LEP flashlight?
Yes. The W3Pro TAC uses a special LEP module that creates a very intense, focused beam for long-distance lighting and signaling.
What battery does the Weltool W3Pro FDE TAC use?
It uses one 21700 rechargeable lithium-ion battery. A Weltool UB21-50 5000mAh 21700 battery is included.
Does the Weltool W3Pro TAC always turn on in high mode?
Yes. The TAC interface defaults to high mode when activated, while low and strobe are hidden modes.
Is the Weltool W3Pro FDE TAC waterproof?
The flashlight is IP67 rated, making it suitable for heavy rain. It should not be used as a professional diving flashlight.
What comes with the Weltool W3Pro FDE TAC?
It includes the flashlight, UB21-50 21700 battery, USB-C charging cable, waterproof ring, and stainless steel pocket clip.