Our Titanium Lockbar Stabilizer (LBS) are a direct replacements for the stock stainless steel model. They are available in 3 different finishes, Plain, Blue Anodized, and Bronze Anodized.
Please use great care when installing your new Lockbar Stabilizer. You will require a .050" Hex wrench or driver to replace the LBS.
When removing or installing, make sure your tool is seated all the way into the screw before turning. Install your new LBS with the knife open so you can apply pressure downward, away from the lockbar to prevent the lockbar from rubbing on the LBS. Please make sure not to over tighten during re-installation!