Description
Remette RT-M1 M1-A – 2.36" Stonewashed S90V Drop Point Titanium Pocket Knife
The Remette RT-M1 M1-A is the bare-metal version of Remette's small RT-M1 folder. Both the 2.36" S90V drop point blade and the titanium handle are sandblasted and then stonewashed, so the whole knife wears one even matte gray. The only color on it is the blue anodized lock button and pocket clip.
That finish is the practical choice of the four RT-M1 versions. Keys and coins leave marks on any titanium knife, and a stonewashed surface absorbs them instead of showing bright scratches. Closed, the M1-A is 4.45" long and 0.34" thick, with a milled pyramid texture on the handle face for grip, a flipper tab and a ceramic ball bearing pivot. A blade this short gives up reach, but not steel: S90V holds an edge longer than almost anything else you will find in a knife this size.
Remette RT-M1 M1-A Specifications
| Specification | Detail |
|---|---|
| Brand | Remette |
| Model | RT-M1 |
| SKU | M1-A |
| Blade Length | 2.36" / 60mm |
| Overall Length | 6.81" / 173mm |
| Closed Length | 4.45" / 113mm |
| Closed Width | 1.30" / 33mm |
| Blade Thickness | 0.10" / 2.5mm |
| Handle Thickness | 0.34" / 8.7mm |
| Blade Steel | S90V |
| Blade Finish | Sandblasted + stonewashed |
| Blade Style | Drop Point |
| Handle Material | Titanium |
| Handle Finish | Sandblasted + stonewashed titanium |
| Lock Type | Button + Liner Lock |
| Pivot | Ceramic ball bearings |
| Accents | Blue lock button and pocket clip |
| Knife Type | Folding Knife |
Frequently Asked Questions
How long is the blade on the Remette RT-M1 M1-A?
The Remette RT-M1 M1-A has a 2.36" (60mm) blade and measures 6.81" overall. It closes to 4.45" and is 0.34" thick, and the short blade keeps it under the length limits many cities and workplaces set. Check your local laws before you carry.
Is S90V a good knife steel?
Yes, for edge retention it is one of the best stainless steels used in production knives. S90V is a Crucible powder-metallurgy steel with roughly 9% vanadium, and those hard vanadium carbides are why the blade on the Remette RT-M1 M1-A stays sharp through a lot of cardboard and cord. The trade-off is sharpening: plan on diamond stones rather than standard whetstones.
Is S90V better than S30V?
S90V holds an edge noticeably longer than S30V because it carries about twice the vanadium, while S30V is easier to sharpen and slightly tougher. On a small slicer like the Remette RT-M1 M1-A, where the blade will not see prying, the longer edge life is the better trade.
How does the button lock on the Remette RT-M1 M1-A work?
It pairs a button lock with a liner lock. Pressing the blue button beside the pivot of the Remette RT-M1 M1-A releases the blade so you can close it with one hand, and the liner lock behind it gives the open blade a second layer of lockup.
Are titanium pocket knives worth it?
For a knife you carry every day, usually yes. Titanium weighs about 40% less than steel by volume and does not rust, so the Remette RT-M1 M1-A gets a solid metal handle without the weight of a steel one. The stonewashed finish on this version also keeps carry wear from standing out.
Where can I buy the Remette RT-M1 M1-A?
The Remette RT-M1 M1-A is available at Going Gear, an authorized Remette dealer. Going Gear also carries the other RT-M1 finishes: the anodized M1-B, the black stonewashed M1-C and the bronze-blade M1-D.
