Description
Reate VK-CLU Ti-Black DLC – 3.3" Frosted Satin Black DLC Elmax Modified Sheepsfoot Titanium Folding Knife
The Reate VK-CLU Ti-Black DLC pairs a black DLC titanium handle with a 3.3" Elmax modified sheepsfoot that Reate finishes in frosted satin under a black DLC coating. The one warm color on the knife is copper: Reate lists a copper backspacer, and in its photos copper shows along the spine and through the cutouts in the handle. The pocket clip is bead-blasted zirconium.
The VK-CLU is a Steven Kempa (VULPEX) design from Reate's VK series. Kempa gave it a handle that bends in a long arc toward the butt, and the blade has a straight edge with a low tip. It locks with a titanium liner lock on a titanium pivot with zirconium washers, opens to 7.6", and weighs 149 g (5.26 oz). Going Gear is an authorized Reate dealer.
One honest note on black knives: DLC is a hard coating, but any black finish will eventually show bright marks where it rubs most, usually around the pocket clip and along the spine. If you want a knife that never looks carried, the darkwashed VK-CLU hides wear better.
Reate VK-CLU Ti-Black DLC Specifications
| Specification | Detail |
|---|---|
| Brand | Reate |
| Model | VK-CLU |
| Variant | Ti-Black DLC |
| SKU | VK-CLU-Ti-Black-DLC |
| Blade Length | 3.3" |
| Overall Length (open) | 7.6" |
| Handle Length | 4.4" |
| Blade Steel | Elmax |
| Blade Finish | Frosted satin with black DLC |
| Blade Style | Modified Sheepsfoot |
| Handle Material | Titanium |
| Handle Finish | Black DLC |
| Lock Type | Titanium Liner Lock |
| Pivot | Titanium |
| Washers | Zirconium |
| Pocket Clip | Zirconium, bead blasted |
| Backspacer | Copper |
| Weight | 5.26 oz (149 g) |
| Designer | Steven Kempa (VULPEX) |
| Series | VK |
| Release | April 2026 |
| Knife Type | Folding Knife |
Frequently Asked Questions
How long is the blade on the Reate VK-CLU Ti-Black DLC?
The Reate VK-CLU Ti-Black DLC has a 3.3" Elmax blade on a 4.4" handle, for an open length of 7.6".
What is DLC coating?
DLC stands for diamond-like carbon, a thin, very hard coating applied in a vacuum chamber. On the Reate VK-CLU Ti-Black DLC it covers the titanium handle and the Elmax blade, adding scratch resistance and an even black color. The sharpened edge of the Reate VK-CLU Ti-Black DLC is bare steel once it has been honed, so the coating doesn't change how you sharpen it.
Is Elmax steel good for a pocket knife?
Yes. The Elmax in the Reate VK-CLU Ti-Black DLC is a Swedish powder-metallurgy stainless with a good balance of edge holding and corrosion resistance, plus enough toughness for everyday cutting. It takes a keen edge and doesn't require diamond plates to maintain, which matters on a knife you carry daily.
What is a modified sheepsfoot blade?
On the Reate VK-CLU Ti-Black DLC, the modified sheepsfoot is a straight cutting edge with a spine that angles down to meet it, leaving a low, strong tip. Compared with a traditional rounded sheepsfoot, the angled spine on the Reate VK-CLU Ti-Black DLC keeps a slightly finer point for detail work like cutting open blister packs.
How do you close a liner lock knife?
To close the Reate VK-CLU Ti-Black DLC, look at the open knife from the edge side and find the titanium liner tab resting behind the blade tang. Push it sideways with your thumb until it clears the tang, start folding the blade, then move your thumb out of the path and let the blade finish closing.
Who makes the Reate VK-CLU Ti-Black DLC?
Reate makes the Reate VK-CLU Ti-Black DLC in Guangdong, China, from a design by Steven Kempa of VULPEX. Reate was founded in 2012 by David Deng, and the VK series is its line of Kempa designs.
Where can I buy the Reate VK-CLU Ti-Black DLC?
The Reate VK-CLU Ti-Black DLC is available at Going Gear, an authorized Reate dealer based in Woodstock, Georgia.
