Reate PL-7 – 3.5″ Belt Satin Nitro-V Trailing Point, Amber Ultem, Pivot Lock Front Flipper

ReateSKU: PL-7-Ultem-Belt-satin

Price:
Sale price$132.00
Stock:
In stock (3 units), ready to be shipped

Description

Reate PL-7 Ultem Belt Satin – 3.5" Belt Satin Nitro-V Trailing Point Folding Knife

The Reate PL-7 Ultem Belt Satin puts a plain belt satin Nitro-V blade in amber Ultem scales, so both the steel and the handle stay light in color. The blade's spine sweeps up to a raised tip, which leaves a long curved belly for slicing.

Belt satin means the flats were finished on a grinding belt, leaving fine lengthwise lines that hide everyday scuffs better than a polish. The PL-7 is shorter overall than the PL-6 at 8" open with a 4.5" handle, and a bit heavier at 4.5 oz. It opens with a front flipper tab and closes when you press the pivot.

Key Features

  • 3.5" Nitro-V trailing point in a belt satin finish
  • Translucent amber Ultem scales
  • Pivot lock release built into the pivot, plus a safety slide
  • Front flipper opening
  • Titanium pocket clip and backspacer
  • 8" open, 4.5" closed, 4.5 oz

Reate PL-7 Ultem Belt Satin Specifications

Specification Detail
Brand Reate
Model PL-7
Variant Amber Ultem handle, belt satin blade
SKU PL-7-Ultem-Belt-satin
Blade Length 3.5"
Overall Length (open) 8"
Handle/Closed Length 4.5"
Blade Steel Nitro-V
Blade Finish Belt satin
Blade Style Trailing point
Handle Material Ultem (PEI)
Lock Type Pivot lock (button-style release at the pivot) with safety slide
Opening Front flipper
Pivot Stainless steel, no washers
Pocket Clip Titanium
Weight 4.5 oz (127 g)
Designer Alvin Lee
Country of Origin China
Knife Type Folding knife

Frequently Asked Questions

What is a trailing point knife used for?

A trailing point is built for slicing, and the Reate PL-7 Ultem Belt Satin uses one: the tip sits higher than the spine, which stretches the curved belly along most of the 3.5" edge. Long draw cuts through cardboard, rope or food come easily. The trade-off is a finer tip that should not be used for prying.

Why is Ultem so good for knife handles?

Ultem is strong for its weight and shrugs off heat and chemicals, which is why it shows up on the Reate PL-7 Ultem Belt Satin. The material is PEI (polyetherimide), a thermoplastic also used in aircraft interiors and medical devices, and in its natural form it is a translucent amber.

What does belt satin mean on a knife?

Belt satin is a finish made by running the blade across an abrasive belt, and on the Reate PL-7 Ultem Belt Satin it leaves fine, straight lines along the Nitro-V flats. It reflects less than a mirror polish and keeps small scratches from standing out.

Is Nitro-V steel any good?

Yes, Nitro-V is a solid everyday steel, and it is what Reate uses on the Reate PL-7 Ultem Belt Satin. It is a stainless steel with added nitrogen and vanadium, so it resists rust, takes a keen edge and comes back quickly on a whetstone. Premium powder steels hold an edge longer but cost more and take longer to sharpen.

How do you close the Reate PL-7 Ultem Belt Satin?

Press and hold the large pivot on the Reate PL-7 Ultem Belt Satin, then fold the blade shut with your fingers on the spine side, clear of the edge. The pivot is the lock release, so there is no liner or lock bar to push aside. If the small slide next to the pivot is engaged, move it off first.

What are the dimensions of the Reate PL-7 Ultem Belt Satin?

The Reate PL-7 Ultem Belt Satin has a 3.5" blade, an 8" overall length and a 4.5" handle. Reate lists the weight at 127 g, about 4.5 oz.

Where can I buy the Reate PL-7 Ultem Belt Satin?

The Reate PL-7 Ultem Belt Satin is sold at Going Gear, an authorized Reate dealer that carries the PL-6 and PL-7 in several handle and blade finishes.

You may also like

Recently viewed