Olight S1-Br Raw Baton Brass 1 x CR123/16340 XM-L2 480 Lumen Neutral White LED Exclusive Limited Edition Flashlight

Olight Reviews

This product has been discontinued. Check these products out.

Share
Olight S1-Br Raw Baton Brass 1 x CR123/16340 XM-L2 480 Lumen Neutral White LED Exclusive Limited Edition Flashlight

The S1-Br is a worldwide exclusive for Going Gear limited to 500 total lights (250 each finish).

The Olight S1 Baton is a tiny, high output light with a long list of great features.  The S1-Br is all of that, but in a solid brass body.

The S1-Br is available in a raw, uncoated brass with stainless steel hardware or a clear PVD coated body with blue hardware.  Similar to the S1-Cu Raw, the S1-Br Raw will develop a tarnish over time.  While not as pronounced as the tarnish that copper develops, raw brass will still patina to a great looking, individualized finish. The flame from the Going Gear logo is laser engraved opposite the side switch.

Like the regular S1, you still have a blinding high output (480 lumens on max), low output (0.5 lumens on moonlight), magnetic tailcap, TIR optic, great interface, compact size, and soft silicone button that made the original S1 one of Olight's most popular lights ever.  The brass body is accented with a silver-colored stainless steel bezel and switch ring on the Raw version and blue PVD coated bezel and switch ring on the PVD version.  Both versions come with a sturdy, deep-carry stainless steel pocket clip.

Features:

  • Thumb sized form factor.
    • diameter: 21mm
    •  length: 61mm
  • Weight:  30g (excluding battery)
  • Stainless steel bezel and switch ring (silver colored on Raw, blue PVD on PVD)
  • Recessed silicon switch to prevent accidental operation.
  • TIR lens to create a balanced beam.
  • Positive polarity on the battery faces the tail of the flashlight for enhanced reliability and a more compact size.
  • Built-in timer: 3 minutes or 10 minutes
  • Lanyard with perforating tool
  • Anti-scratch design when mounting stainless steel clip
  • Cree XM-L2 neutral white LED. Maximum output of 480 lumens
  • 3 standard modes:
    • 6 lumens
    • 75 lumens
    • 480 lumens
  • 2 special modes:
    • 0.5 lumen moonlight mode
    • 10Hz strobe mode.
  • PMMA TIR lens with a 90% light transmittance rate
  • Flat tail cap design contains a strong magnet providing the ability to tail stand and use it as a hands-free work light
  • Removable pocket clip that is scratch resistant
  • Thermal management safety program with overheat protection by dropping high output by 50% within 1 minute of constant on. Turbo mode has a limit of 1.5 minutes.
  • The S1 features a wide range current circuit and can be powered by 1 x CR123A or 1 x 16340
  • Reverse polarity protection to prevent improper battery installation
  • Low standby current below 10uA
  • Luminous intensity:  3000cd
  • Beam distance:  110m on turbo
  • Waterproof:  IPX8

Included items:

  • S1-Ti flashlight
  • CR123 battery
  • White traffic wand
  • Lanyard
  • User manual

Operation:

  • Single click - Turn ON / Turn OFF
  • Click and hold from off - moonlight mode
  • Click and hold while on - cycle through standard modes
  • Quick double click from off - turbo brightness
  • Quick double click while on - select timer mode
  • Quick triple click - strobe mode

Brightness level and corresponding run time

 

CR123A

3V 1500mAh

RCR123A

3.7v 650mAh

High:  480~240 lumens (Ti)

1.5+90 minutes

1.5+60minutes

Medium:  75 lumens (Ti)

6 hrs

4 hrs

Low:  7 lumens (Ti)

40 hours

25 hrs

Moon:0.5 lumens

25 days

15 days

Strobe: 10HZ

3hrs

2 hrs

 

Reviews
review-image
Shopping Cart

Your cart is currently empty.