The S1 Baton is the smallest side switch LED flashlight ever produced by Olight. The S1 features a Cree XM-L2 LED that reaches a maximum beam distance of 110 meters and has a maximum output of 500 lumens. The S1 is powered by 1 x CR123A to maintain the compact form factor while still providing optimal performance. The light has a low profile side switch that is designed to prevent accidental operation when in a pocket or a bag. The light also features a pocket clip, hole for a lanyard, and Olight's signature magnetic tail cap for convenient operation.Â The S1 is so small that you will only notice the light in your pocket when you need it.
Run times and outputs by battery type:
|High*:500-300 lumens||1.5+90 minutes||1.5+60 minutes|
|Medium: 80 lumens||6 hours||4 hours|
|Low: 8 lumens||40 hours||25 hours|
|Moon: 0.5 lumens||25 days||15 days|
|Strobe: 10HZ||3 hours||2 hours|
* High: Max - 500 lumensï¼ˆRCR123A 3.7V), Max - 500 lumensï¼ˆCR123A 3.0Vï¼‰
Remove the flashlight from the package. Make sure that the negative polarity side of the battery is facing the head of flashlight. install the battery and screw the tail cap on tightly.Â Â
Turn ON/OFF: single click the side switch. When you turn on the light, the output level will return to the last output mode (except strobe mode).
Changing brightness level: With the light on, press and hold the side switch. the output will cycle through low, medium, and high brightness levels. Release the side switch when the desired brightness level is achieved.
Moon light mode: when the light is off, click and hold the side switch for 1 second and the moon light mode will activate. If the light is turned off while on moon light mode, single clicking the side switch will automatically return the light to moon light mode.
How to activate the high brightness output when the light is off: quickly double click the side switch.
Strobe mode: triple-click the side switch to activate strobe mode. Click the side switch once to quit strobe mode.
Timer: The S1 contains two timer settings: long timer (10 minutes) and short timer (3 minutes). Double click the side switch to enter this setting. short timer blink for 3 minutes, long time blink for 10 minutes. Double click the side switch to change the timer to the opposite setting. After the setting is saved, the light will blink 3 times and then will enter the timer mode. The light will automatically shut off when the timer is over.