The Niwalker MM18II utilizes a total of three U.S. made Cree emitters, 2*XHP70 and 1*XM-L2. It also has a maximum output of up to 8200 ANSI lumens. The highly efficient circuit design offers maximum output and runtime. Dual Multi-function clicky side switch with momentary activation and on/off Memory function to remember last output setting used (except hidden modes). The advanced thermal protection circuit prevents overheating. Unique reflector design provides great throw, beam distance, and beam pattern. Aircraft grade aluminum, mil-spec hard anodized for maximum wear. Toughened ultra-clear tempered glass lens with anti-reflective coating. Large copper heat sink pad for superior thermal conductivity. LED indicator turns red to alert users to switch to a lower output mode and recharge batteries in time.
Technical Specifications
SPOT XML2:
- 2 lumens / 350hrs
- 14 lumens / 233hrs
- 209 lumens / 35hrs
- 732 lumens / 8hrs
- 1100 lumens / 3hrs40min
- 1480 lumens / 3.5hrs30min
FLOOD XHP70x2:
- 2 lumens / 388hrs
- 13 lumens / 350hrs
- 189 lumens / 50hrs
- 900 lumens / 10hrs
- 2375 lumens / 4hrs15min
- 7500 lumens / 4hrs10min
SPOT+FLOOD:
- 4 lumens / 290hrs
- 28 lumens / 175hrs
- 400 lumens / 20hrs
- 1600 lumens / 3hrs
- 3200 lumens / 2hrs
- 8200 lumens / 1hrs50min
Beam distance:
- FLOOD / 268meters
- SPOT / 418meters
- SPOT+FLOOD / 465meters
Peak beam intensity:
- SPOT / 650000cd
- FLOOD / 1050000cd
- SPOT+FLOOD / 1280000cd
Waterproof: To IPX-7 standard
Impact resistance: 1M
Batteries: four high drain 18650 rechargeable batteries(not include)
Dimensions: 138mm(length) x 74mm(head diameter)
Weight: 499.1g (without battery)
Included accessories Lanyard ,Holster Bag, Handle, Spare o-rings
User Interface
- Turn the light ON/OFF by the side switch. Once you release the switch, the light comes on constant output mode.
- Press-hold the switch from ON to cycle through all the modes: Mode 1 > Mode 2 > Mode 3 > Mode 4 > Mode 5. Release the switch to select the desired output with mode memory.
- Double-click from ON to access Turbo. Double-click again for strobe. Double-click again for strobe. Another double-click for SOS. Another double-click for beacon. Single click the switch to turn the light off.
- Turbo mode steps down to mode 5 when thermal protection kick in to prevent overheating.
- When in standby, press-hold the switch for momentary activation Double press and hold the switch for constant on (Second press-hold within 1.5s)
- Double-click for instant strobe.
- Lock-out mode is accessed by a rapid triple-click of the switch from OFF. Another triple-click re-activates. Standby indicator flashes when batteries are connected but the light is not on. A brief green flash of the switch occurs every three seconds.
- Both switches operates independently.