MecArmy Illuminex-X2S Stainless Steel 130 Lumen 1 x 10180 CREE XP-G2 LED Flashlight


Sale price$29.90
Sold out


The illumineX-X2S is an upgrade from the original X-2. This mini EDC flashlight boasts an ultra bright maximum 130 lumens output and it can be worn around your neck or as a keychain. Similar to the illumineX-2 except it has a newly designed body and easier to access micro-USB port. It uses a rechargeable 10180 lithium-ion battery, this awesome little light is a perfect addition to your everyday carry essentials.


  • 1 x MecArmy illumineX-2 X2S Keychain Flashlight
  • 1 x Keyring
  • 1 x O-ring
  • 1 x Beaded Chain

Primary Features:

  • Utilizes a CREE XP-G2 LED
  • Maximum output of 130 ANSI lumens
  • Patented rechargeable super micro-sized flashlight
  • Rechargeable with any USB port device
  • Quick charge in 1 hour
  • Uses a rechargeable 10180 lithium ion battery
  • Small and exquisite 
  • Reliable twist switch for quick, one-handed operation
  • Battery reverse polarity protection
  • Instant access to low/high mode; 
  • Waterproof to IPX-8 Standard (underwater to 2 meters)


  • CREE XP-G2 LED with a lifespan of up to 50,000 hours
  • Lighting modes: High / Low


  • Specification High Low
  • ANSI lumens (LM) 130 8
  • Runtime(h) 0.56
  • Peak beam intensity(cd) 910
  • Max beam distance(m) 59
  • Impact resistance(m) 1.5
  • Waterproof IPX8(under water 2m)
  • Working voltage: 3.0~4.2V
  • Battery: 1 x 10180 lithium ion Battery
  • Lens: Toughened ultra-clear glass


  • Stainless Steel: Length 43.5mm (1.713") x Head 12.8mm (0.503")

Weight (Excluding battery):

  • Stainless Steel: 14.1g (0.49oz)


Mode Specification



ANSI lumens (LM)






Peak beam intensity(cd)


Max beam distance(m)


Impact resistance(m)



IPX8(under water 2m)

NOTICE: The above-mentioned parameters are approximate and may vary between flashlights, batteries and environments.


  • ON/ OFF: Tighten head to turn on flashlight, loosen head to turn off flashlight
  • While ON: Lightly tighten head for Low mode, Fully tighten head for High mode


  • Properly unscrew and remove the light’s head, and connect a mini USB charging cable

Charging Indicator:

  • When charging the indicator light turns red, when charging is complete the indicator light turns green
  • No indicator light indicates that there is no load.

Charging time: 

  • 1 hour (charging current 100mA / 4.2V) Battery replacement Unscrew and remove the tail of the flashlight and insert the battery with positive side toward the light’s head, screw the tail back on to operate the light. 


  • Do not point the light at human or animal eyes
  • Do not look directly into the light when it is switched on
  • Do not permit children to use the flashlight unsupervised


  • Remove battery when stored for extended periods
  • Replace and lubricate O-Rings as needed to maintain IPX-8 rating
  • Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant 


  • Package size (L x W x H): 13.50 x 7.00 x 2.28 cm / 5.31 x 2.76 x 0.9 inches
  • Package weight: 0.045 kg / 1.58 ounces
  • Product size (L x W x H): 4.35 x 1.28 x 1.28 cm / 1.71 x 0.5 x 0.5 inches
  • Product weight: 0.014 kg / 0.49 ounces


You may also like

Recently viewed