Description
Heretic Knives Custom Koschei NYCKS26-001 – 3.6" DLC Chad Nichols Wave Pool Damascus Folding Knife
Heretic built a small run of custom Koschei for the 2026 New York Custom Knife Show (NYCKS), then split the batch between the show table and its dealers. This is one of those knives. The blade is Chad Nichols Wave Pool Damascus that Heretic deep etched, polished and then coated in DLC, so the pattern reads as gray contour lines on black rather than bright steel.
The titanium chassis is flamed by hand with a torch. That leaves bronze panels with blue running through the seams between them, and because the color depends on how long the heat sits on each spot, no two chassis come out the same. The rest is blacked out: DLC screws and pivot hardware, plus a rock-ground titanium pocket clip finished in DLC.
Underneath the custom work it is the same Koschei that Heretic sells in production. You get Heretic's first crossbar lock, a 3.6" blade and a large thumb hole that opens from either side. Going Gear received one knife from this run.
About the photos: the images are Heretic's photos of knives from this NYCKS batch. The flaming and the Damascus differ piece to piece, so the colors and pattern on NYCKS26-001 will not match the photos line for line.
Heretic Knives Custom Koschei NYCKS26-001 Specifications
| Specification | Detail |
|---|---|
| Brand | Heretic Knives |
| Model | Koschei (Custom, NYCKS Special Edition) |
| SKU | NYCKS26-001 |
| Blade Length | 3.60" |
| Overall Length | 8.24" |
| Blade Thickness | 0.156" |
| Blade Steel | Chad Nichols Wave Pool Damascus |
| Blade Finish | Deep etched, polished, DLC coated |
| Blade Style | Drop point with thumb hole |
| Chassis | Hand-flamed titanium |
| Hardware | DLC |
| Pocket Clip | Rock-ground titanium, DLC |
| Lock Type | Crossbar lock |
| Opening | Manual, thumb hole |
| Made In | USA (Heretic Knives, Melbourne, Florida) |
| Knife Type | Folding Knife |
Lengths are Heretic's published dimensions for the Koschei platform.
Frequently Asked Questions
What is a crossbar lock knife?
A crossbar lock uses a spring-loaded steel bar that spans both sides of the handle and drops in behind the blade tang when the knife opens. On the Heretic Knives Custom Koschei NYCKS26-001, you close the knife by pulling that bar back with your thumb from either side, which makes the lock fully ambidextrous. The Koschei was Heretic's first crossbar lock design.
Are crossbar locks strong?
Yes, crossbar locks are generally considered one of the stronger folding knife locks, because the bar bears on the tang across the full width of the handle instead of from one side. Heretic has not published a lock-strength rating for the Koschei, so treat the Heretic Knives Custom Koschei NYCKS26-001 as a cutting tool and not a pry bar.
What is Chad Nichols Damascus?
Chad Nichols is an American Damascus maker whose patterned steel shows up on a lot of custom and high-end knives. The Heretic Knives Custom Koschei NYCKS26-001 uses his Wave Pool pattern (sometimes written Wavepool), which Heretic etched deep, polished and sealed under DLC. Wipe the blade down after use as you would any Damascus; the DLC adds wear resistance on top of the steel.
What is flamed titanium?
Flamed titanium is titanium heated with a torch until an oxide layer forms on the surface, and the temperature at each spot sets the color, from bronze through purple to blue. The chassis on the Heretic Knives Custom Koschei NYCKS26-001 was flamed by hand, which is why the bronze-and-blue pattern is unique to this knife. Heavy pocket wear can soften the colors over time, which many collectors see as part of the character.
Who makes Heretic knives?
Heretic Knives makes its knives in Melbourne, Florida, and the Heretic Knives Custom Koschei NYCKS26-001 came out of that shop as a custom build for the 2026 New York Custom Knife Show. Heretic is best known for its automatic and OTF knives; the Koschei is one of its manual folders.
How big is the Heretic Knives Custom Koschei NYCKS26-001?
The Heretic Knives Custom Koschei NYCKS26-001 has a 3.6" blade, an 8.24" overall length open and a 4.64" handle, based on Heretic's Koschei specs. The blade is 0.156" thick.
Where can I buy the Heretic Knives Custom Koschei NYCKS26-001?
The Heretic Knives Custom Koschei NYCKS26-001 is available at Going Gear, an authorized Heretic Knives dealer in Woodstock, Georgia. Each knife in the limited NYCKS batch was finished by hand, and Going Gear has a single knife.
