Eagletac T25LR 1870 Lumen 1 x 18650 CREE XHP-35 Hi LED Flashlight-Complete Kit

Dimensions

• Head Dia. - 1.3 inches (33 mm)
• Body Dia. - 1 inches (25.4 mm)
• Length - 5.9 inches (149 mm)1
• Weight
• 4.6 ounces (130 grams) w/o battery
• 6.3 ounces (180 grams) w/ battery

Battery Type

• 1x18650 or 2xCR123A or 2x18650 (optional)2
• Compatible battery (diameter/length)
• 123A: (16-16.8mm/34-34.5mm)
• 18650: (18-18.8mm/65-68.8mm)
• Protection PCB trip current: 8A or higher
• Read precaution with li-ion batteries.

Operating voltage

• 2.7V - 8.4V
All batteries are connected in series. Do not exceed 8.4V.

What's included

• T25L-R flashlight
• Spare o-rings
• User Manual
• Mil-Spec Para-cord Lanyard w/ quick attachment clip
• Removeable darken pocket clip made of spring steel w/ harden treatment
• Type-C (bi-direction insert) USB charging cable (3.3feet/1meter) w/ AWG24 copper wire

Two models

• Base
• Smooth aluminum black bezel
• EAGTAC 18650 2600mAh li-ion battery (8A High discharge protection pcb built-in at anode)
• Kit
• Crenelated aluminum black bezel
• EAGTAC 18650 3500mAh li-ion battery (8A High discharge protection pcb built-in at anode) authentic Sanyo GA cell
• Add-on diffuser filter with flip-cover feature
• Heavy duty nylon holster
• (US) UL certified 5V 1A USB charger
• (EU) TUV/GS/CE certified 5V 1A USB charger

Carrying method

• Para-cord lanyard with quick attachment clip
• Heavy duty nylon holster (kit only)

Waterproof

• IPX-8 standard

Replaceable items

• Lens

Reflector

• Smooth aluminum reflector

Material

• HAIII hard anodization aerospace aluminum

LED

• CREE XHP35 HI E2 Cool White LED

Max output

• CREE XHP35 HI E2 Cool White LED
• LED lumen: 1870
• ANSI FL-14 lumen: 1410

CREE XHP35 HI E2 Cool White LED 

• Center lux: 37,100 lux
• Center spot angle: x°
• Spill light angle: x°
• Beam distance: 420 yards / 385 meters

Lens

• Waterwhite glass lens w/ harden treatment
• Anti-reflective (AR) coating on both side (96% transparency)

LED circuit

• W1900 Pro - XHP35
• Offer current regulated MAX output with a single li-ion battery down to 3.0V (underload)
• MAX output slowly reduces after 3.0V and operates until 2.65V (underload)
• Built-in shut down voltage at 2.65V (underload) to prevent over-discharge for unprotected li-ion battery (user may restart at lower levels)
• Active thermal management feature (adjustment range 75%-100%)5
• Synchronous boost controller with ultra low resistance mosfet which offers up to 95% efficiency
• High switching frequency convertor for more compact circuitry design
• Non-dimming constant current regulation for all output levels without flicking
• Zero standby current

Charging circuit

• L950 Type-C
• 5V USB input (requires 1A or higher)
• 950mA MAX charging current
• Uses the latest standard type-c usb charging plug, supports bi-direction insert
• Constant current / Constant voltage charging logarithm
• Small current charging for low voltage battery (less than 3.0V)
• Extends battery cycle life by charging battery that reads 4.05V or lower
• Precise voltage detection design +/- 1%
• No trickle charge
• Smart charging level report system

Charging level report (charging)

• Flashlight will flash one time to report the estimated remaining charging time by reading the battery voltage (at five seconds after plugged-in)
• Flash once: > 2 hours
• Flash twice: 1-2 hours
• Flash 3 times: < 1 hour

Output and Runtime

• Five brightness levels
• Led lumen:
• XHP35 HI E2:
  18705-1330/403/40
• ANSI FL-1 lumen:
• XHP35 HI E2:
  14105-1039/312/31
• Runtime:
• 1-1.3/5.7/70 hrs (1x18650 3500mAh) 0.8-1/4.3/52 hrs (1x18650 2600mAh) 
• 0.5-0.7/3/40 hrs (2xCR123A) 
• 2-2.6/12/150 hrs (2x18650) 

• Optional disorienting strobe output

Operations

Basic operations:

• Turn on the flashlight by pressing the tailcap button until it clicks.
• Twist the head to select between three output levels.
• You can pre-selected any output level before turning on the light.

• Tail strobe feature (off by default): Switch to 1st level and turn the flashlight on and off 20 times (one second or less between each click) to toggle this feature. With the tailcap strobe setting enabled, a double press of the switch button (within one second) will activate the strobe output.

Battery charging:

• Remove the waterproof cover and insert the included type-c charging cable to charge the battery. User must turn on the flashlight switch at the tailcap to charge. 
• Flashlight will switch off the LED output during charge until the charging is completed. Restart the flashlight or switch to other brightness level to wake the flashlight with cable removed.)
• To check the charging progress anytime during charge, turn the head of the flashlight to wake the charging level report.
• Maximum charging time for a depleted battery: 2.5-3 hrs (2600mAH 18650 li-ion), 3.5-4 hrs (3500mAh 18650 li-ion)

Other features

• LED direct soldering on copper for maximum heatsink ability
• User replaceable glass lens
• Battery reverse polarity protection
• Ultra low internal resistance phosphor bronze springs (silver coated)
• Spring loaded positive and negative terminal
• One piece head design for maximum heat transfer
• Tailcap battery stabilizer design to prevent battery movement inside the battery tube