Turn on the flashlight by pressing the tailcap button until it clicks.
Twist the head to select between three output levels.
You can pre-selected any output level before turning on the light.
Tail strobe feature (off by default): Switch to 1st level and turn the flashlight on and off 20 times (one second or less between each click) to toggle this feature. With the tailcap strobe setting enabled, a double press of the switch button (within one second) will activate the strobe output.
Remove the waterproof cover and insert the included type-c charging cable to charge the battery. User must turn on the flashlight switch at the tailcap to charge.
Flashlight will switch off the LED output during charge until the charging is completed. Restart the flashlight or switch to other brightness level to wake the flashlight with cable removed.)
To check the charging progress anytime during charge, turn the head of the flashlight to wake the charging level report. Maximum charging time for a depleted battery: 2.5-3 hrs (2600mAH 18650 li-ion), 3.5-4 hrs (3500mAh 18650 li-ion) Controls
LED direct soldering on copper for maximum heatsink ability
User replaceable glass lens
Battery reverse polarity protection
Ultra low internal resistance phosphor bronze springs (silver coated)
Spring loaded positive and negative terminal
One piece head design for maximum heat transfer
Tailcap battery stabilizer design to prevent battery movement inside the battery tube
1.3 inches (33 mm)
1 inches (25.4 mm)
5.9 inches (149 mm)1
4.6 ounces (130 grams)
w/o battery 6.3 ounces (180 grams)
Output and Runtime
Three brightness levels
XHP35 HD E4:
1x18650 or 2xCR123A or 2x18650 (optional)2
Compatible battery (diameter/length)
Eagletac T25L-R, 2000 Lumen Flashlight Cree XHP 35 HI