Eagletac SX30L2DR XP-L Hi CW 7.4V rechargeable li-ion battery R33 1700 Lumen LED Flashlight-No Kit

EagleTac Reviews

This product has been discontinued. Check these products out.

Share
Eagletac SX30L2DR XP-L Hi CW 7.4V rechargeable li-ion battery R33 1700 Lumen LED Flashlight-No Kit

Dimensions

Head Dia.
1.9 inches (47 mm)
Body Dia.
1.2 inches (31 mm)
Length:
9 inches (230 mm)
Weight
14.8 ounces (420 grams)1

Battery Type

Operating voltage

  • 5.4V - 8.4V6

What's included

  • SX25L2-DR flashlight
  • Spare o-rings
  • User Manual
  • Mil-Spec Para-cord Lanyard w/ quick attachment clip
  • Silicon waterproof cap
  • Flat tail-stand tailcap
  • 7.4V rechargeable 4500mAh R33 li-ion battery (IC protected, protects against over-charge/over-discharge/short circuit)
  • 12V car charger adapter w/ 6 foot heavy duty high current cord

Two models

  • Base
    • Refer to what's included section

Carrying method

  • Para-cord lanyard with quick attachment clip
  • Rigid nylon holster w/ retention device

Waterproof

  • IPX-8 standard

Replaceable items

  • Lens

Accessories / Spare parts

  • R33 7.4V 4500mAh battery pack
  • AC-DC adapter
    • 100V-240V to [email protected], 18Watts
    • US version - UL certified/listed, PSE certified/listed
    • European version - TUV/CE certified/listed
  • 12V car charger adapter
  • Rigid nylon holster w/ self-retention device
  • Lens

LED

    • CREE XP-L HI V3 Cool White LED
      + Flood LED Array (C.W.)

Max output

  • CREE XP-L HI V3 Cool White LED
    • LED lumen: 1700
    • ANSI FL-14 lumen: 1247
  • 3014 SMT LED array
    • LED lumen: 940 (Cool White)
    • LED lumen: 840 (Neutral White)

Beam Profile

CREE XP-L HI V3 Cool White LED 

  • Center lux: 81,300 lux
  • Center spot angle: 3.7°
  • Spill light angle: 50°
  • Beam distance: 622 yards / 570 meters
3014 SMT LED array 

  • Spill light angle: 180°
 
                    

Lens

  • Waterwhite glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both side (96% transparency)

LED circuit

  • C5500 DIFF
    • Current regulated synchronous buck driver w/ efficiency of up to 96% (Vin=6V, MAX level)
    • Wide voltage input range
    • Non-dimming constant current regulation for all output levels without flicking
    • Battery level report system
    • Energy saving feature5
    • High switching frequency controller for more compact circuitry design
    • Dual LED channels output
    • Very low standby current (negligible)

Charging circuit

  • C2000 SW II
    • Highly efficient step-down charging IC
    • Voltage input 10V - 15V
    • Compatible with 12V automobile DC socket
    • Constant current and constant voltage charging method
    • Fast charge to 40% in one hour
    • Very high charging voltage accuracy (1%)
    • Small current charge for low voltage battery
    • No trickle charge when battery is full
    • Automatically ends charging when charging current reduces below 10%

Reflector

  • Smooth aluminum reflector

Material

  • HAIII hard anodization aerospace aluminum
  • Optical grade shatterproof diffuser material

Battery level report

  • A blue LED indicator under the main switch reports the estimated battery remaining capacity
    • Flash once: lower than 10%
    • Flash twice: 30%-50%
    • Flash 3x times: 50%-70%
    • Flash 4x times: higher than 70%

Output and Runtime

    • Five brightness levels (SPOT only)
      • Led lumen:
        17005-1353/873/350/137/20
      • ANSI FL-1 lumen:
        12475-1072/690/276/107/17
      • Runtime:
        2.3/4.5/14/42/250 hours
  • Five brightness levels (Diffuser only)
    • LED lumen: 940/460/178/68/10
    • Runtime:
    • 5.5/13/35/105/250 hours
  • Five brightness levels (SPOT + Diffuser)
    • SPOT LED lumen: 800/390/140/44/4
    • Diffuser LED lumen: 900/400/143/47/5
    • Runtime
    • 3/6.5/22/70/250 hours
  • Three hidden auxiliary outputs7
    • Disorienting Strobe/Beacon (1.67Hz)/S.O.S.

Operations

Basic operations:
  • Turn on the light at MAX output by pressing the BLACK button switch. Turn on the light at LOWEST output by pressing the WHITE button switch
  • To turn off the light anytime, press and release the BLACK button switch.
Spot / Diffuser setting:
  • Press and hold the BLACK button switch and press the white button switch to cycle between i) spot, ii) diffused, and ii) all LED on setting.
Advanced:
  • For MAX output momentary on, press and hold the BLACK button switch for immediate output.
  • To switch between different brightness levels, press and release the WHITE button switch when the flashligh is on. 

    (For example: if you want to turn on the flashlight at the 3rd level, just press and release the white button switch three times from off.)
  • To enter hidden auxiliary levels, press and hold the WHITE button switch for 4 seconds when the flashligh is on.
  • For instant MAX output - at any output level, press and hold the BLACK button switch. Release the button to return to previous level.
  • For instant Strobe output - at any output level (even) off), double press and hold the BLACK button switch. Release the button to return to previous level (or off).
  • The optional switch button located at the tailcap is treated as the secondary BLACK switch button.


Charging:
  • Remove the waterproof silicon cap and insert the charging power plug to charge.
  • Blue LED indicates the battery is being charged. Charging is finished when the blue LED indicator is off

Controls

Other features

  • LED direct soldering on copper for maximum heatsink ability
  • User replaceable glass lens
  • Battery reverse polarity protection
  • Ultra low internal resistance phosphor bronze springs (silver coated)
  • Spring loaded positive and negative terminal
  • Tail stand
  • Custom made silicon oring in grey solid color for glass lens to block glare in SPOT mode

Warranty

MODEL
SKU
EAG-SX30L2DRNK
MANUFACTURER
ONTARIO KNIVES
CHARGING PORT
USB
BATTERIES INCLUDED
No
Reviews
review-image
Shopping Cart

Your cart is currently empty.