Dimensions
- Head Dia.
- 1.9 inches (47 mm)
- Body Dia.
- 1.2 inches (31 mm)
- Length:
- 9 inches (230 mm)
- Weight
- 14.8 ounces (420 grams)1
Battery Type
- EAGTAC 7.4V rechargeable li-ion battery
R33 - Do not use the built-in charger to charge non-EAGTAC 7.4V battery pack
- Read precaution with li-ion batteries.
Operating voltage
- 5.4V - 8.4V6
What's included
- SX25L2-DR flashlight
- Spare o-rings
- User Manual
- Mil-Spec Para-cord Lanyard w/ quick attachment clip
- Silicon waterproof cap
- Flat tail-stand tailcap
- 7.4V rechargeable 4500mAh R33 li-ion battery (IC protected, protects against over-charge/over-discharge/short circuit)
- 12V car charger adapter w/ 6 foot heavy duty high current cord
Two models
- Base
- Refer to what's included section
Carrying method
- Para-cord lanyard with quick attachment clip
- Rigid nylon holster w/ retention device
Waterproof
- IPX-8 standard
Replaceable items
- Lens
Accessories / Spare parts
- R33 7.4V 4500mAh battery pack
- AC-DC adapter
- 100V-240V to [email protected], 18Watts
- US version - UL certified/listed, PSE certified/listed
- European version - TUV/CE certified/listed
- 12V car charger adapter
- Rigid nylon holster w/ self-retention device
- Lens
LED
- CREE XP-L HI V3 Cool White LED
+ Flood LED Array (C.W.)
Max output
- CREE XP-L HI V3 Cool White LED
- LED lumen: 1700
- ANSI FL-14 lumen: 1247
- 3014 SMT LED array
- LED lumen: 940 (Cool White)
- LED lumen: 840 (Neutral White)
Beam Profile
CREE XP-L HI V3 Cool White LED- Center lux: 81,300 lux
- Center spot angle: 3.7°
- Spill light angle: 50°
- Beam distance: 622 yards / 570 meters
- Spill light angle: 180°
Lens
- Waterwhite glass lens w/ harden treatment
- Anti-reflective (AR) coating on both side (96% transparency)
LED circuit
- C5500 DIFF
- Current regulated synchronous buck driver w/ efficiency of up to 96% (Vin=6V, MAX level)
- Wide voltage input range
- Non-dimming constant current regulation for all output levels without flicking
- Battery level report system
- Energy saving feature5
- High switching frequency controller for more compact circuitry design
- Dual LED channels output
- Very low standby current (negligible)
Charging circuit
- C2000 SW II
- Highly efficient step-down charging IC
- Voltage input 10V - 15V
- Compatible with 12V automobile DC socket
- Constant current and constant voltage charging method
- Fast charge to 40% in one hour
- Very high charging voltage accuracy (1%)
- Small current charge for low voltage battery
- No trickle charge when battery is full
- Automatically ends charging when charging current reduces below 10%
Reflector
- Smooth aluminum reflector
Material
- HAIII hard anodization aerospace aluminum
- Optical grade shatterproof diffuser material
Battery level report
- A blue LED indicator under the main switch reports the estimated battery remaining capacity
- Flash once: lower than 10%
- Flash twice: 30%-50%
- Flash 3x times: 50%-70%
- Flash 4x times: higher than 70%
Output and Runtime
- Five brightness levels (SPOT only)
- Led lumen:
17005-1353/873/350/137/20 - ANSI FL-1 lumen:
12475-1072/690/276/107/17 - Runtime:
- 2.3/4.5/14/42/250 hours
- Five brightness levels (Diffuser only)
- LED lumen: 940/460/178/68/10
- Runtime: 5.5/13/35/105/250 hours
- Five brightness levels (SPOT + Diffuser)
- SPOT LED lumen: 800/390/140/44/4
- Diffuser LED lumen: 900/400/143/47/5
- Runtime 3/6.5/22/70/250 hours
- Three hidden auxiliary outputs7
- Disorienting Strobe/Beacon (1.67Hz)/S.O.S.
Operations
Basic operations:- Turn on the light at MAX output by pressing the BLACK button switch. Turn on the light at LOWEST output by pressing the WHITE button switch
- To turn off the light anytime, press and release the BLACK button switch.
- Press and hold the BLACK button switch and press the white button switch to cycle between i) spot, ii) diffused, and ii) all LED on setting.
Advanced:
- For MAX output momentary on, press and hold the BLACK button switch for immediate output.
- To switch between different brightness levels, press and release the WHITE button switch when the flashligh is on.
(For example: if you want to turn on the flashlight at the 3rd level, just press and release the white button switch three times from off.) - To enter hidden auxiliary levels, press and hold the WHITE button switch for 4 seconds when the flashligh is on.
- For instant MAX output - at any output level, press and hold the BLACK button switch. Release the button to return to previous level.
- For instant Strobe output - at any output level (even) off), double press and hold the BLACK button switch. Release the button to return to previous level (or off).
- The optional switch button located at the tailcap is treated as the secondary BLACK switch button.
Charging:
- Remove the waterproof silicon cap and insert the charging power plug to charge.
- Blue LED indicates the battery is being charged. Charging is finished when the blue LED indicator is off
Controls
Other features
- LED direct soldering on copper for maximum heatsink ability
- User replaceable glass lens
- Battery reverse polarity protection
- Ultra low internal resistance phosphor bronze springs (silver coated)
- Spring loaded positive and negative terminal
- Tail stand
- Custom made silicon oring in grey solid color for glass lens to block glare in SPOT mode
Warranty
- Ten years performance guaranteed warranty
- Read flashlight regular maintenance
MODEL
SKU
EAG-SX30L2DK
MANUFACTURER
ONTARIO KNIVES
CHARGING PORT
USB
BATTERIES INCLUDED
No