CREE XHP35 HD E4 Cool White LED LED lumen: 2000 ANSI FL-14 lumen: 1618 Center lux: 43,200 lux Beam distance: 453 yards / 416 meters W1900 Pro Circuit - XHP35 Offer current regulated MAX output with a single li-ion battery down to 3.0V (underload) MAX output slowly reduces after 3.0V and operates until 2.65V (underload) Built-in shut down voltage at 2.65V (underload) to prevent battery over-discharge (user may restart at lower levels) Active thermal management feature (adjustment range 75%-100%)5 Synchronous boost controller with ultra low resistance mosfet which offers up to 95% efficiency High switching frequency convertor for more compact circuitry design Non-dimming constant current regulation for all output levels without flicking Para-cord lanyard with quick attachment clip Heavy duty nylon holster (kit only) Waterproof IPX-8 standard Smooth aluminum reflector HAIII hard anodization aerospace aluminum< Waterwhite glass lens w/ harden treatment Anti-reflective (A.R.) coating on both side (96% transparency) Very low standby current (negligible) Battery level report (discharging) A blue LED indicator under the main switch reports the estimated battery remaining capacity Flash once: lower than 20% Flash 3 times: 20%-50% Flash 3 times: 50%-80% Flash 4 times: higher than 80% Output
Led lumen: 2000-1350/820/355/130/17 ANSI FL-1 lumen: 1618-1120/719/299/108/14 Runtime: 1-1.3/2.7/7.2/22/200 hrs (1x18650) 6 0.5-0.7/1.4/3.8/12/110 hrs (2xCR123A) 2-2.8/5.7/15/47/430 hrs (2x18650) Optional disorienting strobe output Battery Type 1x18650 or 2xCR123A or 2x18650 (kit)2 Protection PCB trip current: 8A or higher Compatible battery (diameter/length) 123A: (16-16.8mm/34-34.5mm) 18650: (18-18.8mm/67-68.5mm) Operating voltage2.7V - All batteries are connected in series. Do not exceed 8.4V.
SX30C2 flashlight Spare o-rings User Manual Mil-Spec Para-cord Lanyard w/ quick attachment clip CR123A Battery Magazine Removeable darken pocket clip made of spring steel w/ harden treatment Crenulated stainless steel bezel Flashlight head with front mounting machined thread Add-on diffuser filter with flip-cover feature Extension body tube for two 18650 li-ion batteries Heavy duty nylon holster