USB charging cable (3.3feet/1meter) w/ AWG24 copper wire
EAGTAC 18650 Li-ion battery included
Smooth stainless steel bezel
EAGTAC li-ion 18650 2600mAh battery (authentic Sanyo Japan cell)
Removeable darken pocket clip made of spring steel w/ harden treatment
UL certified USB 5V 1A wall charger (100V-240V)
Heavy duty nylon holster
Carrying method
Para-cord lanyard with quick attachment clip
Heavy duty nylon holster
Waterproof
IPX-8 standard
Replaceable items
Lens
Reflector
Smooth aluminum reflector
Material
HAIII hard anodization aerospace aluminum
LED
Nichia 219C 4000K CRI92 R9050 D240 Neutral White LED
Max output
Nichia 219C 4000K CRI92 R9050 D240 Neutral White LED
LED lumen: 800
ANSI FL-14 lumen: 640
Beam Profile
Nichia 219C 4000K CRI92 R9050 D240 Neutral White LED - SPOT
Center lux: 9,100 lux
Center spot angle: x°
Spill light angle: x°
Beam distance: 208 yards / 191 meters
Lens - Spot/Flood
Waterwhite glass lens w/ harden treatment
Anti-reflective (AR) coating on both side (96% transparency)
Multi-layers low color distortation A.R. coating on both side (98% transparency) to prevent reflections and color shadow over wider wavelength - Nichia 219 CRI92 only
LED circuit
C3200L DIFF3 SC
Highly integrated design w/ built-in side click switch
Smart battery level report system
Ultra low dropout voltage (< 0.25v) for longer current regulated runtime using single 18650 battery
Dual LED output design with three output groups
High switching frequency (1MHz) controller for more compact circuitry design
Low internal resistance design offers up to 99% efficiency7
Non-dimming constant current regulation for all output levels without flicking
Dual LED output design
Zero standby current
Energy saving feature5
Charging circuit
L950 SC
5V USB input (requires 1A or higher)
950mA MAX charging current
Constant current / Constant voltage charging logarithm
Small current charging for low voltage battery (less than 3.0V)
Precise voltage detection design +/- 1%
No trickle charge
Smart charging level report system
Battery level report (discharging)
A blue LED indicator under the main switch reports the estimated battery remaining capacity
Flash once: lower than 20%
Flash twice: 20%-50%
Flash 3 times: 50%-80%
Flash 4 times: higher than 80%
Charging level report (charging)
A blue LED indicator under the main switch reports current charging level
Flash once: lower than 50%
Flash twice: 50%-75%
Flash 3 times: >75%
Constant on: 100% (done)
Output and Runtime
Four brightness levels (SPOT only)
Led lumen: 11605-980/590/221/77/9
ANSI FL-1 lumen: 9305-795/477/179/63/7
Runtime:
1.5/2.8/8.5/28/200+ hours (1x18650)
0.8/1.5/5/17/140 hours (2xCR123A)
Four brightness levels (Flood only)
Led lumen: 600/290/140/40/3
Runtime:
3.3/7.5/19/45/200+ hours (1x18650)
1.7/4/12/30/140 hours (2xCR123A)
Four brightness levels (SPOT + Flood)
Spot Led lumen: 720/295/61/3
Diffuser Led lumen: 350/170/80/20/2
Runtime:
1.8/4.5/12/35/200+ hours (1x18650)
1/2.5/6.5/22/140 hours (2xCR123A)
Operations
Basic operations:
Turn on the light at MAX output by pressing the tailcap button until it clicks.
Turn on the light at LOW output by holding the side switch button while pressing the tailcap button until it clicks.
For momentary on function, slightly press the tailcap button
To switch between different brightness levels, press the side button switch w/ flashlight on
To enter hidden auxiliary mode, press and hold the side button switch for 3 seconds w/ flashlight on
Toggle SPOT and FLOOD output:
Press and hold the side switch for more than one second to switch between spot LED, flood LED, or both on.
Battery charging:
Remove the waterproof cover and insert the charging cable to charge the battery. User must turn on the flashlight switch at the tailcap to charge. (The flashlight will switch off the LED output during charge automatically until the charging cable is disconnected.)
The indicator may start flashing when user plug in the charging cable (without turning on the tailacp switch). Switch on the tailcap switch to start charging and the charging indicator will reflect the current charging level.
Other features
Diffuser head built-in with spot output glare shield
LED direct soldering on copper for maximum heatsink ability (Spot LED only)