EagleTac PH10LC2 1120 Lumen XM-L2 U2

Output and Runtime
Five brightness levels
Led lumen:
11205-1000/586/227/78/4

Runtime:
1.5/2.8/8/25/200+ hours (1x18650)
0.8/1.5/4.5/15/150 hours (2xCR123A)

Beam Profile
CREE XM-L2 U2 LED
Center lux: 6,300
Center spot angle: 11°
Spill light angle: 72°
Beam distance: 172 yards / 158 meters

Operations
Signal clicky switch
Turn on the light at maximum output (constant on) by pressing and holding the on/off switch button
Turn on the light at its lowest output (constant on) by pressing and release the switch button within 0.3 second
To switch between output levels, (with light turned on) press and hold the on/off switch for longer than 0.6 second to switch to next output. Press and hold the switch will cycle between all levels.
To access 1.5Hz blinking mode, (with light turned on) press and hold the on/off switch for more than 10 seconds to enter
Button boot voltage indicator (Blue)
1x18650 mode
Flashes 3 times
(higher than 3.7V)
Flashes 2 times
(between 3.3V and 3.7V)
Flashes once
(lower than 3.3V)
2xCR123A mode
Flashes 3 times
(higher than 4.5V)
Flashes 2 times
(between 4.5V and 3.5V)
Flashes once
(lower than 3.5V)