EagleTac MX30L3C 3x 18650 / 6x CR123A 2815 Lumens CREE XP-G2 CW LED Flashlight-No Kit

EagleTacSKU: EGT-MX30L3C-No Kit

Sale price$154.90
Sold out


A big leap forward from its predecessor MX25(L3). The all-new MX30(L3) series is redesigned from ground up. It features better heatsink, more rigid built, higher output, and better looking. The innovative two buttons switch design allows user to conveniently opreate the light with one-hand only. The dual switches position always aligns exact with the gorgeous machined profile of the flashlight body. This also aids user to better predict the switch position in the dark.

This patent pending (US/HK/CN) battery compartment design allows users to directly insert batteries to the flashlight body tube to use without any battery tray or magazine. Highly conductive silver coated brass springs are used at both positive and negative terminal to ensure solid conductivity. CNC machined polyoxymethylene discs are used to protect against battery reverse polarity. Powered by six top binned CREE XP-G2 S3 Cool White LED. The MX30L3-C gives you the maximum brightness output in its class. Neutral white output color is also available via custom ordering. Get maximum continuous runtime with the lowest output of 25lm, which can easily last through weeks with continuous usage when it's dark. Get 1.5 hours of runtime at the maximum output level. There are three additional intermediate levels that offers 2.5/6/17 hours of runtime.

With super wide voltage input from 5.4V all the way to 19V. You can use three rechargeable 18650 li-ion batteries for regular usage. During emergency, you can opt for six primary CR123As which can be easily obtained from EAGTAC dealers or any convenience stores. Unlike competitors, the EAGTAC C5000 HV circuit offers constant regulated output for this 6V CREE XH-P50 LED for all brightness levels. Our unique serial battery setup allows the input voltage to be always higher than the LED forward voltage for constant current regulation. We use the latest power step-down technology in the industry with high-end passive components to maximize circuitry efficiency and the dropout voltage of the circuitry. The six individual aluminum machined reflectors offer a nice beam output without any visible donut or beam artifacts. We use special and custom made machinery tooling to make the deepest reflector possible. Deeper reflector means more reflective surface for converting more spill output into the spot beam.


  • Head Diameter: 2.5 inches (62 mm)
  • Body Diameter: 1.8 inches (45.5 mm)
  • Length: 5.3 inches (135 mm)
  • Weight: 12.9 ounces (367 grams)


  • Five Brightness Levels (Led Lumens): 37805-3180/2250/1080/420/25
  • ANSI FL-1 lumen: 28155-2408/1751/840/328/20
  • Runtime: 1.5/2.5/6/17/350 hours (3x18650), 0.7/1.3/3.1/9.5/200 hours (6xCR123A)
  • Three hidden auxiliary outputs: Disoriented Strobe/Beacon 


  • 3x18650 or 6xCR123A
  • Compatible battery (diameter/length): 123A: (16-16.8mm/34-34.5mm), 18650: (18-18.8mm/67-68.5mm)


  • Center lux: 45,300 lux
  • Center spot angle: 7.4°
  • Spill light angle: 64°
  • Beam distance: 464 yards / 426 meters


  • 5.4V - 19V


  • Waterwhite glass lens w/ harden treatment.
  • Anti-reflective (AR) coating on both side (96% transparency).


  • LED direct soldering on copper for maximum heatsink ability
  • User replaceable glass lens
  • Battery reverse polarity protection
  • Ultra low internal resistance phosphor bronze springs (silver coated)
  • Spring loaded positive and negative terminal
  • Tail stand
  • Tail-cap w/ switch for kit model


  •  A blue LED indicator under the main switch reports the estimated battery remaining capacity
  • Flash once: lower than 20%
  • Flash twice: 20%-40%
  • Flash 3x times: 40%-60%
  • Flash 4x times: higher than 80%


  • MX30L3-C flashlight
  • Spare o-rings
  • User Manual
  • Mil-Spec Para-cord Lanyard w/ quick attachment clip
  • 3xCR123A Battery Magazines


  • Smooth aluminum bezel
  • Flat tailcap (tail-stand)


  • Stainless steel bezel
  • Comes with front-mount thread for bezel and filter attachment
  • Signal connection through the body tube for tailcap with switch
  • Tailcap w/ switch and tail-standing ability
  • Heavy duty nylon holster w/ self-retention device and open-top design
  • ET54II Diffuser filter w/flip cover (YRGB w/flip cover also available as option)

You may also like

Recently viewed