Output and Runtime
Four brightness levels
Led lumen: 118010/536/104/8
ANSI FL-1 lumen: 98011/449/86/7
Runtime (hours): 18/1.9/11/100+
Tactical mode (default):
Two brightness levels + two strobe @ 100% output
Led lumen: 118010/172/Strobe I/Strobe II
ANSI FL-1 lumen: 98010/141
Seven hidden auxiliary outputs
See other battery type runtime here.
Tactical forward clicky switch
Turn on the light by pressing the tailcap button until it clicks.
Twist the head to select between four pre-defined output levels.
You can pre-selected output level before turning on the light.
Cycle through auxiliary modes: Tighten the head (1st level), and loosen to 3rd (or 4th level) and then tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
Switching between regular mode and tactical mode (default): Switch to 2nd output level and turn the flashlight on and off for 20 times.
Tail strobe feature (off by default): With this enabled, you can access strobe output at the tailcap switch button . To enable (or disable) this function (disable from factory), switch to 1st level and turn the flashlight on and off 20 times (one second or less between each click). With the tailcap strobe setting enabled, a double press of the switch button (within one second) will activate the strobe output.
Energy saving feature (on by default): M25C2 Turbo reduces output by 24% after 200 seconds at turbo mode. With this feature turned off, M25C2 Turbo reduces output by 9% instead. To toggle this feature, twist the head to 4th level and turn the flashlight on and off for 20 times. Once setting has been changed, LED will output 3 seconds at 100% (enable), or 1 second at 100% (disable).
Eagletac M25C2 Turbo, 1180 Lumens CREE XM-L2 U3 LED