EagleTac GX25L2T Turbo XM-L U2 ANSI 870 Lumen Tactical Flashlight - Rechargeable-Complete Kit

EagleTacSKU: GX25L2T_R-Complete Kit

Sale price$164.90
Sold out


Please note that the non-kit version DOES NOT come with a charger, but does come with a rechargeable battery.  Purchase the kit version if you want the chargers and other accessories.

High lumen output

LED lumen

XM-L U2 (Cool White): 1030/475/91/8

ANSI FL-12 lumen

XM-L U2 (Cool White): 856/389/75/7

Smart energy management

1) Energy saving feature (on by default) reduces output by 20% after 200 seconds at turbo mode. This feature enables high output for demending users, especially when using body extender with higher total battery capacity, to unleash the maximum output of your G25C2.

2) ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EagleTac’s ANSI Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight.

Excellent runtime and flat regulation

G25C2 runs for 200 hours on its lowest brightness level. The current regulated circuit design allows constant output throughout its runtime for all output levels without PWM-flicking.

At highest brightness level, G25C2 current regulates for 1.1 hours using two EagleTac CR123A batteries. With two 18650 (using 4 cells body extender) you get about 3 hours of runtime on high (2.5 hours with energy saving feature turned off).

The current regulation control method allows the just right of amount of current going through the LED. This results in constant brightness output regardless of battery type, LED variation, and temperature change.

Beam distance

The G25C2 reflector design allows you to view object up to 268 yards / 245 meters at turbo output with the XML U2 LED.


G25C2 uses polished aluminum reflector with super low orange peel reflector for maximum output and a pleasing beam. No donut, dark dot, or artifacts inside the beam!

Reliability that you can count on

The C2100 extreme circuit survives the toughest torture environment including: 1) repeatedly over-night burn-in test, 2) over input voltage test, 3) over-driven output current test, and 4) high temperature oven test.

We reserved a lot of head room when designing this circuit. This makes the C2100 extreme circuit one of the top performer and rock stable circuit in its class.

Kit version includes:
- Durable aluminum flip-over filter assembly
- Diffused, yellow, red, blue, and green optical grade anti-reflective coated add-on lens.

Technical Specs:


  • Head Dia. 2.5 inches (39.5 mm)

  • Body Dia 1 inches (24.5 mm)

  • Length: 9.7 inches (224 mm)

  • Weight: 11.3ounces (195 grams)



  • CREE XM-L U2


Output and Runtime:

Four brightness levels (Regular mode)

  • ANSI FL-1 lumen: 8705-765/401/78/8
  • Runtime: 1.7/4.5/25/150+ hours (R18)


Two brightness levels (Tactical mode)

  • ANSI FL-1 lumen: 8705-765/126/Strobe I/Strobe II
  • Runtime: 1.7/15 hours (R18)


Seven hidden auxiliary outputs

  • Strobe/Strobe(Var)/Flash(Hi)/S.O.S.(Fast)/S.O.S./Becaon/Flash(Lo)


Battery Type

  • 2x18650 li-ion
  • 4xCR123A (for backup use)


Operating Voltage:

  • 2.7V - 12V


Beam Profile:

  • Center lux: 21,500 lux
  • Center spot angle: 7°
  • Spill light angle: 58°
  • Beam distance: 320 yards / 293 meters



  • Waterwhite glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both side (96% transparency)



  • Basic - Turn on the light by press and release the on/off button switch (<0.4s). To turn off the light, press and release the switch again.
  • For momentary on, press and hold the button switch for immediate output.
  • Twist the head to select between four output levels. You can pre-select the desired output level before turning on the flashlight.
  • Instant Turbo output - at any output level, press and hold the flashlight for 100% output. Release the button to return to previous level.
  • Instant Strobe output - at any output level (or off), double press and hold the on/off button switch for strobe output. Release the button to return to previous level (or off)
  • To access auxiliary levels, starting at head tight position (1st level), loosen to 3rd (or 4th level) and tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
  • Advance (Programmable Features) To switch between tactical and regular mode, turn on the flashlight at 1st level, dial to 2nd level and then back to 1st level for five times within five seconds.


LED Circuit:

  • C3500 SEL
  • Synchronous buck w/ efficiency of up to 95%
  • Non-dimming constant current regulation for all output levels
  • Very low standby current (uA)
  • Turbo boost technology



  • Smooth aluminum reflector



  • HAIII hard anodization aerospace aluminum



  • IPX-8 standard


What's Included:

  • GX25L2 flashlight
  • Spare o-rings
  • User Manual
  • Mil-Spec Para-cord Lanyard w/ quick attachment clip


Carrying Method:

  • Para-cord lanyard
  • Rigid nylon holster w/ retention device


Other Features:

  • User replaceable glass lens
  • Power gauge
  • Turbo boost technology
  • Battery reverse polarity protection
  • Tail stand
  • Upgradeable turbo-size head and reflector



  • Ten years performance guaranteed warranty



You may also like

Recently viewed