XM-L U2 (Cool White) Limited offer only! : 770/320/59/2
XM-L T5 (Neutral White): 665/277/52/2
XM-L U2 (Cool White) Limited offer only! : 640/267/49/2
XM-L T5 (Neutral White): 551/229/43/12
1) Energy saving feature (on by default) reduces output by 20% after 200 seconds at turbo mode. This feature enables high output for demending users, especially when using body extender with higher total battery capacity, to unleash the maximum output of your G25C2.
2) ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EagleTac’s ANSI Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight.
G25C2 runs for 200 hours on its lowest brightness level. The current regulated circuit design allows constant output throughout its runtime for all output levels without PWM-flicking.
At highest brightness level, G25C2 current regulates for 1.1 hours using two EagleTac CR123A batteries. With two 18650 (using 4 cells body extender) you get about 3 hours of runtime on high (2.5 hours with energy saving feature turned off).
The current regulation control method allows the just right of amount of current going through the LED. This results in constant brightness output regardless of battery type, LED variation, and temperature change.
The G25C2 reflector design allows you to view object up to 268 yards / 245 meters at turbo output with the XML U2 LED.
G25C2 uses polished aluminum reflector with super low orange peel reflector for maximum output and a pleasing beam. No donut, dark dot, or artifacts inside the beam!
The C2100 extreme circuit survives the toughest torture environment including: 1) repeatedly over-night burn-in test, 2) over input voltage test, 3) over-driven output current test, and 4) high temperature oven test.
We reserved a lot of head room when designing this circuit. This makes the C2100 extreme circuit one of the top performer and rock stable circuit in its class.
Using 3 cells extender allows user to get 50% more runtime than standard two CR123A. 4 cells extender doubles the runtime. With increased battery juice, user may consider disabling the energy saving feature to maximize the output.
We included a battery spacer for CR123A and RCR123A users when using the body extender. It slides directly into the end of the flashlight body tube and stabilize the battery from moving around the body tube.
Body extender offers different way for you to hold the light, either in tactical cigar grip mode, or daily usage mode.Body extenders are included in our complete add-on kit, or as a stand-alone accessory