Eagletac DX30LC2-BR XP-L Hi CW 1 x 18650 / 2 x CR123A 1160 Lumen LED Flashlight-Complete Kit

EagleTacSKU: EAGDX30LC2K
Price:
$112.90
Stock:
Sold out

Description

Dimensions

Head Dia.
0.9 inches (22.5 mm)
Body Dia.
0.85 inches (22 mm)
Length:
5.2 inches (132 mm)
Weight1
2.3 ounces (65 grams)
w/o battery
3.9 ounces (111 grams)
w/ battery

Battery Type

  • 1x18650 or 2xCR123A2
  • The built-in li-ion rechargeable function only works with a single 18650 battery
  • Compatible battery (diameter/length)
    • 123A: (16-16.8mm/34-34.5mm)
    • 18650: (18-18.8mm/67-68.5mm)
  • Read precaution with li-ion batteries.

Operating voltage

  • 2.7V - 6V
    • All batteries are connected in series. Do not exceed 6V. Do not use two rechargeable 3.0/3.7V RCR123A.

What's included

  • DX30LC2-BR flashlight
  • Aluminum bike mount set
  • Silicon padding for installation
  • hex key wrench
  • Spare o-rings
  • User Manual
  • Mil-Spec Para-cord Lanyard w/ quick attachment clip
  • CR123A Battery Magazine
  • Comes with stainless steel bezel
  • Removeable silver pocket clip made of spring steel w/ harden treatment
  • USB charging cable (3.3feet/1meter)
    w/ AWG24 copper wire
  • EAGTAC 18650 Li-ion battery included

Two models

  • Base
    • Smooth stainless steel bezel
    • EAGTAC li-ion 18650 2600mAh battery (authentic Sanyo Japan cell)

Carrying method

  • Para-cord lanyard with quick attachment clip
  • Heavy duty nylon holster

Waterproof

  • IPX-8 standard

Replaceable items

  • Lens

Reflector

  • Light textured aluminum reflector

Material

  • HAIII hard anodization aerospace aluminum

LED

    • CREE XP-L HI V3 Cool White LED

Max output

  • CREE XP-L HI V3 Cool White LED
    • LED lumen: 1160
    • ANSI FL-14 lumen: 905

Beam Profile

CREE XP-L HI V3 Cool White LED 

  • Center lux: 20,800 lux
  • Center spot angle: 5.2°
  • Spill light angle: 62°
  • Beam distance: 314 yards / 288 meters

Lens

  • Waterwhite glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both side (96% transparency)

LED circuit

  • C3200L SC
    • Ultra low dropout voltage (<0.2v) for longer current regulated runtime
    • Highly integrated design w/ built-in side click switch
    • Low internal resistance design offers up to 99% efficiency
    • High switching frequency (1MHz) controller for more compact circuitry design
    • Non-dimming constant current regulation for all output levels without flicking
    • Smart battery level report system
    • Energy saving feature5
    • Zero standby current

Charging circuit

  • L950 SC
    • 5V USB input (requires 1A or higher)
    • 950mA MAX charging current
    • Constant current / Constant voltage charging logarithm
    • Small current charging for low voltage battery (less than 3.0V)
    • Precise voltage detection design +/- 1%
    • No trickle charge
    • Smart charging level report system

Battery level report (discharging)

  • A blue LED indicator under the main switch reports the estimated battery remaining capacity
    • Flash once: lower than 25%
    • Flash twice: 25%-45%
    • Flash 3 times: 45%-65%
    • Flash 4 times: higher than 85%

Charging level report (charging)

  • A blue LED indicator under the main switch reports current charging level
    • Flash once: lower than 50%
    • Flash twice: 50%-75%
    • Flash 3 times: >75%
    • Constant on: 100% (done)

Output and Runtime

    • Five brightness levels
      • Led lumen:
        11605-980/590/221/77/9
      • ANSI FL-1 lumen:
        9055-790/475/178/62/7
      • Runtime:
        1.5/2.8/8.5/28/200+ hours (1x18650)
        60.8/1.5/5/17/140 hours (2xCR123A)
  • Three hidden auxiliary outputs7
    • Disorienting Strobe/Beacon (1.67Hz)/S.O.S.

Operations

Bike mount installation:
  • Trim the silicon padding according to your handle bar size (test fit if needed) and wrap it around the bar handle.
  • Install the flashlight mount over the top of the silicon padding and fasten two mounting screws from underneath it with the hex key wrench.
  • Insert the flashlight to the mount, adjust the flashlight aiming position, and secure the pivoting mounting screw.
  • For general on-road ridding, the flashlight beam should be adjusted to point on the road in front of you to prevent blinding upcoming traffic or pedestrian.
Basic operations:
  • Turn on the light at MAX output by pressing the tailcap button until it clicks.
  • Turn on the light at LOW output by holding the side switch button while pressing the tailcap button until it clicks.
  • For momentary on function, slightly press the tailcap button
  • To switch between different brightness levels, press the side button switch w/ flashlight on
  • To enter hidden auxiliary mode, press and hold the side button switch for 3 seconds w/ flashlight on
Battery charging:
  • Remove the waterproof cover and insert the charging cable to charge the battery. User must turn on the flashlight switch at the tailcap to charge. 
    (The flashlight will switch off the LED output during charge automatically until the charging cable is disconnected.)
  • The indicator may start flashing when user plug in the charging cable (without turning on the tailacp switch). Switch on the tailcap switch to start charging and the charging indicator will reflect the current charging level.

Other features

  • LED direct soldering on copper for maximum heatsink ability
  • User replaceable glass lens
  • Battery reverse polarity protection
  • Ultra low internal resistance phosphor bronze springs (silver coated)
  • Spring loaded positive and negative terminal
  • Bi-directional pocket clip design
  • Built-in li-ion charger

Warranty

You may also like

Recently viewed