Output and Runtime
Five brightness levels
ANSI FL-1 lumen:
1.5/2.8/8.5/28/200+ hours (1x18650)6
0.8/1.5/5/17/140 hours (2xCR123A)
Three hidden auxiliary outputs7
Disorienting Strobe/Beacon (1.67Hz)/S.O.S.
Turn on the light at MAX output by pressing the tailcap button until it clicks.
Turn on the light at LOW output by holding the side switch button while pressing the tailcap button until it clicks.
For momentary on function, slightly press the tailcap button
To switch between different brightness levels, press the side button switch w/ flashlight on
To enter hidden auxiliary mode, press and hold the side button switch for 3 seconds w/ flashlight on
Remove the waterproof cover and insert the charging cable to charge the battery. User must turn on the flashlight switch at the tailcap to charge.
(The flashlight will switch off the LED output during charge automatically until the charging cable is disconnected.) The indicator may start flashing when user plug in the charging cable (without turning on the tailacp switch). Switch on the tailcap switch to start charging and the charging indicator will reflect the current charging level.
Crenulated stainless steel bezel
EAGTAC li-ion 18650 3500mAh battery (authentic Sanyo Japan cell)
UL certified USB 5V 1A wall charger (100V-240V)
Heavy duty nylon holster
Removeable dark gray pocket clip made of spring steel w/ harden treatment
EagleTac DX30 LC2-SR 1160 Lumen Array Cree XP-L HI V3 KIT