Stainless steel bezel w/ durable dark titanium coating
Stainless steel pocket clip (Titanium coated)
Rigid Nylon Holster w/ self-retention device and flip
Mil-Spec Paracord Lanyard w/ quick attachment clip
Nichia 219C CRI-92 D240 LED
Turbo boost technology
1) Turbo boost technology is activated every time you turn on at turbo output setting. It offers 20% more power to the LED for the first 200 seconds at turbo mode.
2) ANSI FL-1 is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTAC ANSI FL-1 Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight.
Clicky on/off switch & Twisty head
Easy on/off operation
Press the switch button until it clicks to turn on the flashlight. To switch off the light, press the switch again until it clicks.
Half press the switch button to switch to the next output level. With the head loose, AUX hidden modes are available after you repeat two sets of regular low-med-high output. Loosen the head for group one output, and tighten the head for group two output.
1) Moonlight output (disable by default) - disable or enable the moonlight output. The entire output range of the group 1 output will be shifted to a brighter output set or a dimmer output set accordingly. Toggle this setting starting with head loosen, turn on the light, and then repeat tight and loose for three times.
2) Mode memory - remembers the last output of the group 1. To toggle this setting, with head tighten, turn on the light, and repeat loose and tight for three times.
Turbo boost technology
This is activated every time you turn on at turbo output setting. It offers 20% more power to the LED for the first 200 seconds at turbo mode. It’s normal for the light to get warm at such level. Do not leave the light running unattended.
The CNC precisely cut and rolled square-shape knurling provides a sure grip throughout the entire flashlight body.
Reverse polarity protection
Your safety is our first priority
Inserting battery in the wrong direction may lead to serious damage to the flashlight and the battery. We incorporate a physical structure to protect against reverse polarity without compromise (battery with a protruding button top is required).
Excellent thermal path
The one-piece head design allows the LED to dissipate heat quickly to the outside world. This result in higher output (LED loses output as junction temperature increases) and longer LED life.
Durable structure against drop impact
The stainless steel bezel provides highly drop resistance. O-ring is used as a cushion to protect and water seal the harden water white glass lens (with anti-reflective and Sapphire coating)
EagleTac D25C Clicky 330 Lumen Nichia 219C CRI-92 D240 LED