Description
Much improved from its predecessor PN20a. The all-new D25AAA model gets redesigned from ground up. It features better heatsink, more rigid built, higher output, better interface, and better looking.
Dimensions
- Head Dia. 0.55 inches (14 mm)
- Body Dia. 0.5 inches (13 mm)
- Length: 2.7 inches (70 mm)
- Weight 0.4 ounces (13 grams)
Battery Type
- 1xAAA or 1x104402
- Compatible battery (diameter/length) AAA: (10-10.5mm/44-45mm)
Operating voltage
- 0.8V - 4.2V
- Supports 1.2V NiMH, 1.5V alkaline, 1.5V(1.7V) lithium, 3.7V li-ion
Carrying method
- Lanyard hole provided
- User removable stainless steel pocket clip (Titanium coated)
- Magnetic tailcap
Waterproof
- IPX-8 standard
LED
- Nichia 219B SW45 D220
Max output
- LED lumen: 115
- ANSI FL-1 lumen: 68
Beam Profile
- Center lux: 250 lux
- Center spot angle: 19.9°
- Spill light angle: 53°
- Beam distance: 35 yards / 32 meters
Lens
- Waterwhite glass lens w/ harden treatment
- Anti-reflective (AR) coating on both side (96% transparency)
LED circuit
- A300M
- High switching frequency (1MHz) controller for more compact circuitry design
- Low internal resistance design offers up to 90% efficiency
- Non-dimming constant current regulation for all output levels
- Zero standby current
- Supports output dimming with li-ion battery
- Allows LED direct drive with li-ion battery at high mode
Reflector
- Optical grade acrylic TIR optics
Material
- HAIII hard anodization aerospace aluminum
Operations
- Tighten the head to turn on the flashlight. Loose the head to turn off the light.
- Repeat the on/off action to cycle through three brightness levels, starting from low.
- Cycle through two set of regular brightness levels to enter hidden auxiliary modes
Other features
- Strong rare earth magnet installed at the tailcap (grey color coated)
- Battery reverse polarity protection
- Ultra low internal resistance phosphor bronze springs (silver coated)