4Sevens Quark 123 (no clip) XP-G S2 Cool White

FOURSEVENS Reviews

This product has been discontinued. Check these products out.

Share
4Sevens Quark 123 (no clip) XP-G S2 Cool White

Specifications

  • Powered by: 1 CR123A battery (included)
  • LED Emitter: Premium Cree XP-G S2
  • Voltage range: 0.9V ~ 4.2V
  • Dimensions
  • Length: 3.2 inches
    Diameter: 0.86 inches
    Weight: 1.4 ounces
  • 5 Current Regulated Output Levels
  • No clip
  • Flash modes: Strobe, SOS, Beacon
  • Square threads for lifetime smooth operation
  • Type III Hard Anodized finish
  • Flexible & secure finger grip accessory
  • Fully knurled
  • IPX-8 Waterproofing
  • Impact-resistant glass lens with Dual-coating - sapphire coating on the outside and anti-reflective coating on the inside for optimal efficiency and durability.
  • T-6061 Aircraft-grade Aluminum Body
  • Stands on Tail (candle mode)

Typical Output Levels and Runtimes + (LED drive current)

Moonlight: 0.6 lumens for 701 hours, (1ma)
Low: 4 lumens for 60 hours (10ma)
Medium: 19 lumens for 13 hours (50ma)
High: 83 lumens for 162 minutes (250ma)
Max: 174 lumens for 1 hour (700ma)
Strobe: 174 lumens for 1.6 hours
Beacon: 0-174 lumens pulse for 12 hours

Operation

Operating your Quark 123 is simple. Make sure its batteries are inserted with the positive side (+) toward the head. Ensure the bezel (the 'head' of the light) and tailcap are tightened, then depress the tailcap button fully so that it 'clicks' and the light turns on.

The two most commonly used modes are Max and Moonlight, the highest and lowest modes. To access Max, you simply tighten the bezel. To access Moonlight, you just loosen the bezel a half-turn. That's it.

You can also cycle through the Quark's other modes just as easily. Lightly depress the button momentarily (you don't need to 'click' it off) and the output will switch to the next mode. The mode sequence is determined by whether the bezel is tightened or loosened:

Loosened Bezel: Moonlight -> Low -> Medium -> High -> SOS -> Beacon

Tightened Bezel: Max -> Strobe

Once the Quark has been turned off for at least three seconds, it will revert to the first level of output in the sequence, either Moonlight or Max.

Warranty

4Sevens warrants its products to be free from defects in materials and workmanship. We will repair or replace, at our option, without charge, any product or part which is found to be defective under normal use and service within 120 months from the date of purchase with proof of purchase. Such repair or replacement shall be the purchaser's sole and exclusive remedy under this warranty. This warranty does not cover normal maintenance and service and does not apply to any products or parts which have been subject to modification, misuse, abuse, negligence, accident, or improper maintenance or repair by anyone other than 4Sevens.

MODEL
quark123s2
SKU
quark123s2nc
MANUFACTURER
ENO
BEACON
Yes
BODY COLOR
Black
HOLSTER INCLUDED
Yes
COMPATIBLE BATTERIES
1 x CR123
INFINITE OUPUT ADJUSTMENT
No
LED TYPE
CREE XP-G
LED TINT
Cool
SOS
Yes
STROBE
Yes
SWITCH TYPE
Forward
PROGRAMMABLE
No
BODY MATERIAL
Aluminum
Reviews
review-image
Shopping Cart

Your cart is currently empty.