Olight S1R Baton (V2) 900 Lumen 1 x RCR123 (Read description) CREE XM-L2 LED Rechargeable Flashlight

Please note that this light is made only to work fully with the 550 mAh Olight RCR123 only and not the 650 mAh RCR123 shown in the "customers who bought this also bought" area.  The 550 mAh RCR123 is a specialized IMR battery with positive and negative contacts on one end that allow for both a high current to power the max output as well as the built-in charging.  A regular CR123 or RCR123 will work in the light, but you will not have access to all of the outputs or the built-in charging.  An IMR RCR123 from another brand will work in the light, but you will not have access to the built-in charging.

The Olight S1R baton (S1R) is a side-switch, rechargeable EDC flashlight. Powered by a single specialized RCR123 rechargeable lithium battery (please note that you need this Olight RCR123, not the 650 mAh one), it has a maximum output of 900 lumens and utilizes a Cree XM-L2 LED. Coupled with a TIR optic lens for a high transmission rate, the S1R delivers a very balanced beam. The S1R has six brightness levels and a strobe mode, covering an output range of 0.5 to 900 lumens. The outer appearance of the S1R follows the same style of the BATON Series. It comes with a magnetic charging cable. You can use a desktop micro-dock as an optional charger, making it easier to charge whether at home or outdoors.

FEATURES

• Cree XM-L2 LED
• The flashlight can be charged through the magnetic contact charging port (other batteries may also be used in the S1R, but cannot be charged)
• New 750mA portable USB charging cable
• Brightness increases or decreases gradually: when the flashlight is switched on/off, it will light up or fade gradually to protect eyes from the stimulation caused by sudden brightness changes
• Five output modes: 900 Lumens ~ 1.5 Minutes, 600 Lumens ~ 1.5 Minutes, 300 Lumens ~ 60 Minutes, 60 Lumens ~ 4.5 Hours, 12 Lumens ~ 33 Hours, .5 Lumens ~ 15 Days 
• Flat magnetic tailcap that allows it to be secured to ferrous metal surfaces as a hands-free option
• Lockout mode can be activated on the side switch for accidental triggering protection, along with a low-voltage indicator underneath
• Reverse polarity protection circuits
• Timer Setting: Short (3 minutes) and long (9 minutes) 
• The standby current is below 30uA 

LENS 

• PMMA TIR lens

LIGHT SOURCE

• Cree XM-L2 LED

DIMENSIONS

• Length: 2.6in / 66mm
• Bezel Diameter: 0.83in / 21mm
• Body Diameter: 0.78in / 20mm
• Weight: 1.27oz / 36g (excluding batteries)

BODY MATERIAL

• 6061-T6 aluminum body with anti-scratch type-III hard anodized nish

BATTERY SOURCE

• 1 x specialized IMR 550mAh 3.7V 5C RCR123A (included) or 1 x CR123A (not included)

WARRANTY

• 5 Year warranty

ACCESSORIES

• Lanyard
• User Manual
• MCC Magnetic Charging Cable 
• 550mAh 5C IMR RCR123A Battery 
• Sheath