ZebraLight H31 R5 CR123 220 Lumen Headlamp

Main Features and Specifications

• LED: Cree XP-G Cool White (color temperature 6100-6500 K)
• User Selectable Modes: 3 (High, Medium and Low). Each mode can be configured to one of the two sub-levels.
• Light Output
  • High:         H1 220 Lm (0.9 hrs)   or    H2  120 Lm (2 hrs)
  • Medium:    M1   43 Lm (12 hrs)    or   M2    24 Lm (23 hrs)
  • Low:         L1     5 Lm (3.7 days) or    L2   0.5 Lm (21 days)
  • Light output are out the front (OTF) values. Runtime tests are done using Panasonic CR123A lithium batteries. Runtimes are usually much shorter with rechargeable RCR123 (16340) batteries, especially with protected 16340s that have higher discharge cut off voltage.
    
• Battery: One CR123A lithium primary or RCR123 Li-ion rechargeable. Batteries are not included in the package.
• Battery Shelf Life: Over 3 years under parasitic drain
• Beam Type
  
  • 76° spill beam spread
  • 8.6° (3 feet at 20 feet) hot spot
• Dimensions
  • Diameter: 0.90 inch (23 mm)
  • Length:    2.57 inch (65 mm)
• Weight
  • 0.97 oz (27.6 gram) with clip, without battery or headband
    
• Features
  • Electronic soft-touch switch, with a 200,000 cycle operating life
  • Smart user interface provides fast and easy access to all brightness levels
  • Precision machined casing from premium grade Alcoa aluminum bar stock
  • Proprietary heat sinking design bonds the LED metal core board directly to the uni-body aluminum casing, providing unblocked thermal paths to over 92% of the surface area.
  • Durable natural hard anodized finish (Type III Class I)
  • SCHOTT ultra clear lens with anti-reflection coatings on both sides
  • Bezel down clip (pre-installed)
  • Can be used as a headlamp with the included headband (clip can remain installed when the light is on the headband)
  • Orange peel textured reflector
  • Anti-roll and tail-stand capable
  • Glow In The Dark (GITD) silicone ring near the tail cap
  • Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations
  • Waterproof to IPX8
    
    

Operations

• From Off
  • Short click turns on the light to High (H2) instantly. Click again quickly to cycle from High to Medium, and Low.
  • Press and hold to cycle through Low, Medium and High, release to set.
• When On
  • Short click turns off the light.
  • Press and hold to cycle from Low to High, release to set. The light always cycle from Low to High regardless which level you are currently in.
  • Double click at any level to toggle and select between the two sub-levels for that level. Medium and Low selections are memorized after the light is turned off and through battery changes. H1 is not memorized.
    

Accessories in the package

• One black silicone holder with headband
• Two o-rings
• Extra GITD and black silicone rings