Olight S2-Cu Baton Copper 2 x CR123/ 1 x 18650 950 Lumens CREE XM-L2 CW LED Flashlight

OlightSKU: OLI-S2CU

Price:
Sale price$69.95
Stock:
Sold out

Description

The S2-Cu Baton is a limited edition version of the popular S2 with a solid copper body and stainless steel hardware.  The copper body is uncoated and will tarnish over time, giving the light a great, personalized look. 

Going Gear is the exclusive North American dealer for the S2-Cu.

We have a bundle available if you need batteries, a charger, or other accessories for your light.

S2 description (differences are the copper body and the included diffuser cone):

The S2 Baton (S2) is a new side switch LED flashlight powered by a single 18650 battery or two CR123A lithium batteries (not included). The S2 uses a high performance Cree XM-L2 LED which is able to deliver a maximum output of 950 lumens. The S2 has a smooth, even beam thanks to the 90% light transmittance PMMA TIR lens. The S2 has the same excellent signature features as the OLIGHT S-series flashlights, including a low-profile side switch, removable pocket clip, magnetic tail cap, and timer. The S2 is the best choice for users looking for a flashlight that can take an 18650 battery and still have an extremely small form factor.

Features:

  • 3mm shorter than the length of the S20 with a total length of 103mm
  • Stainless steel flashlight bezel and switch ring
  • PMMA TIR lens with a 90% light transmittance rate to deliver a balanced beam with a 22 degree emitting angle
  • Positive polarity end on the battery faces the tail of the flashlight
  • Built-in timer: 3 minutes or 10 minutes
  • Lanyard with insertion tool
  • Cree XM-L2 LED, Beam output ranging from 0.5 to 950 lumens
  • Copper body with stainless steel hardware
  •  4 standard modes: 950 lumens, 400 lumens, 80 lumens, and 10 lumens
  • 2 special modes: 0.5 lumen moonlight mode, and a 10Hz strobe mode
  • Flat tail cap design with a strong magnet providing the ability to tailstand and use it as a hands-free work light
  • Removable pocket clip that is scratch resistant
  • Thermal management safety program with overheat protection by dropping high output by 50% within 1 minute of constant on. Turbo mode has a limit of 2 minutes.
  • Wide range current circuit and can be powered by 2 x CR123A or 1 x 18650 (no battery included)
  • Reverse polarity protection to prevent improper battery installation
  • Low standby current below 10uA

Operation:

  • Single click --- Turn ON / Turn OFF
  • Click and hold --- Change brightness levels (from on) or activate moon light mode (from off)
  • Quick double click --- Turbo brightness )from off) or enter timer setting (from on)
  • Quick triple click --- strobe mode

Included Items:

  • S2 Baton
  • Lanyard
  • Diffuser cone
  • User manual

Features

Specification

Body material

Raw copper body

Stainless steel pocket clip, stainless steel flashlight bezel, stainless steel switch ring

Dimension

Length: 103mm  Diameter: 23mm

Weight

112 g (excluding batteries)

Color

(body + clip)black

LED

Cree XM-L2 CW

Operating voltage

2.8 to 8.4V

Compatible battery

1 x 18650 (protected only)

2 x CR123A

Brightness level and corresponding run time

 

Turbo: 950 lumens

High: 400 lumens

Medium: 80 lumens

Low: 10  lumens

Moon:0.5 lumens

Strobe: 10HZ

Luminous Intensity

 

5, 000 cd

Max throw distance

 

142 meters

waterproof

IPX8

 

You may also like

Recently viewed