The H01 is iTP's first headlamp, featuring the AAA form factor that they perfected with the A3 EOS. Tiny and light while still being super bright, the H01 is a great addition to your lighting arsenal.
Specifications:
- LED Type: Cree XP-E Q5
- Function: Low-Med-High
- Finish: HA Type Ⅲ
- Reflector: Orange Peel
- Lens:Anti-shattering ultra clear lens, anti-scratching and anti-slip
- Water and Dust Resistant to IP68
- Switch: Head Twisty Switch
- Mil-spec: MIL-STD-810F
- Battery: 1 x AAA, 1 x Rechargeable NiMh AAA, or 1 x 10440 (due to the small body size, 10440 batteries are not recommended since it may cause the light becoming hot very quickly). Batteries are not included.
- Three output levels: Low 1.5 lumens (50 hours) -> Medium 18 lumens (4 hours) ->-High 80 lumens (55 minutes)
- Standard Accessories: 1 x Clip, 2 x O-rings, 1 x Manual
- Size and Weight:
- L 52.5mm (2.07'') x D 16.2mm (0.64'') x W 36.2mm (1.43'') ,
- 22.8g (Excluding Battery and belt), 50.8g (Excluding battery)
- Operation:
- Battery installation:
- Remove the light tail.
- Insert the battery with the negative end toward the tail.
- Operation:
- Insert the battery and tighten the tail
- Tighten the head clockwise to turn on the headlamp.
- When the light is on, loosening (counter-clockwise) and tightening (clockwise) the head within 1 second will change the mode between low, medium and high level.
- After choosing a specific mode, the headlamp will memorize that level and will default to the level when turned on.
- Loosen the head to turn off the headlamp.
This product was added to our catalog on Friday 14 May, 2010.
