EagleTac T20C2 Mark II 720 Lumen XM-L T6 Upgraded to XM-L U2

Save 20%
EagleTacSKU: EGT-T20C2MARKIISMLU2

Price:
Sale price$79.99 Regular price$99.99
Stock:
Sold out

Description

EagleTac T20C2 MKII XM-L T6 720 Lumen Flashlight + Batt EagleTac T20C2 - MSRP $110 The T20C2 XM-L is the next generation in cutting edge flashlight technology. Rated at an incredible 720 lumens with 580 ANSI FL-1 Lumen, The EagleTac T20C2 XM-L is the brightest in its class. This flashlight is ideal for both First Responders and the general public.

New to the T20C2
CREE XM-L T6 LED, featuring C2100 circuit w/ turbo boost technology
LED Lumen output: 720 (XM-L)
ANSI FL-1 Lumen output: 580 (XM-L)
Recent upgrades to the T20C2 MKII include:
-New rear switch mechanism and tail boot
-Redesigned detachable stainless steel clip, titanium coated, secured by clip ring
-Revised user interface (see instructions below)
The New TURBO BOOST technology with the C2100 Light Engine delivers 4 levels of output - 720 Lumen TURBO "BOOST" for three minutes, then drops to 1.5a/500 Lumen standard high to extend runtime. Switching the light off/on will reset TURBO Boost Mode
Features:
LED Lumen: 12/105/460/720 ANSI FL-1 Lumnen: 10/90/370/580 Runtime 100+ hr/10 hrs/1.5 hrs Strobe (9.5 Hz)/Slow-Blink (2 Hz)/SOS: 2.5/2.4/5.8 hours Lux @ 1meter: XM-L T6 LED: 7700 lux Three levels of output activated by twisting the Head/Bezel Three levels output, activate by twisting bezel Optional tactical strobe mode (disabled from factory), operated by pressing rear switch twice Stainless steel bezel Syntax ultra-clear glass lens w/ harden and AR coating Type III finish / aerospace tough aluminum Low orange peel reflector for maximum output and a pleasing beam Gold plates on all contacts Superior tactical knurling and griping aerodynamic Protrude tactical 0", bezel diameter 1.3", length 5.5", weight 4.25oz. Battery: Two CR123A lithium batteries or one 18650 Li-ion (button-top cells only) Operating Voltage Range: 2.7V to 9V

Operation: (Non-Tail Strobe Version)

Press lightly for momentary on/off or press and Change to UI: To reach low and auxiliary modes; start from general/med mode (head loosened) and double twist tight then loose to access low and auxiliary modes. Continue the double twist until you reach the desired mode.

You may also like

Recently viewed