Description
Battery:
2xCR123A battery, 2xRCR123A or 1x18650 li-ion
Operating Voltage Range: 2.7V to 8.4V
XP-G S2
LED Lumen: 493/340/44/8
Runtimes 1.8/3/33/150+ hours
Dimensions:
Length: 4.5 inch (11.5 cm)
Body Diameter: 0.85 inch (2.2 cm)
Head Diameter: 0.9 inch (2.25 cm)
Body Weight (excluding batteries): 1.7 ounces (49 grams)
Operations:
1) Press on the switch button until it clicks to turn on the flashlight. To switch off the light, press the switch again until it clicks.
2) Switching between group output: With the flashlight on, tight the head to access group 2 output. Loose the head to access group 1 output.
3) Switching between modes: With the flashlight on, slightly press the switch and release (within 1.5s) to switch to the next output.
Programmable Features
1) Moonlight output - dim or increase the entire output range of the group 1 output. Toggle this setting starting with head loosen, turn on the light, and then repeat tight and loose for three times.
2) mode memory* - remembers the last output in group 1. To toggle this setting, with head tighten, turn on the light, and repeat loose and tight for three times. (* D25A2 clicky and C clicky only)
2xCR123A battery, 2xRCR123A or 1x18650 li-ion
Operating Voltage Range: 2.7V to 8.4V
XP-G S2
LED Lumen: 493/340/44/8
Runtimes 1.8/3/33/150+ hours
Dimensions:
Length: 4.5 inch (11.5 cm)
Body Diameter: 0.85 inch (2.2 cm)
Head Diameter: 0.9 inch (2.25 cm)
Body Weight (excluding batteries): 1.7 ounces (49 grams)
Operations:
1) Press on the switch button until it clicks to turn on the flashlight. To switch off the light, press the switch again until it clicks.
2) Switching between group output: With the flashlight on, tight the head to access group 2 output. Loose the head to access group 1 output.
3) Switching between modes: With the flashlight on, slightly press the switch and release (within 1.5s) to switch to the next output.
Programmable Features
1) Moonlight output - dim or increase the entire output range of the group 1 output. Toggle this setting starting with head loosen, turn on the light, and then repeat tight and loose for three times.
2) mode memory* - remembers the last output in group 1. To toggle this setting, with head tighten, turn on the light, and repeat loose and tight for three times. (* D25A2 clicky and C clicky only)